Weigh Bars turn your squeeze chute into a livestock scale

Posted on September 23, 2010 by Rob

The easiest way to weigh your livestock is when they’re calm and contained. This environment allows for accurate measuring and is exactly what you get when your cattle are in the squeeze chute. Turning your squeeze chute into a livestock scale is made quick and easy with the rugged Weigh Bars from Barn World.

Weigh Bar

This chute scale kit is made with carbon steel and finished in a high quality epoxy for longevity and ruggedness. It includes two loaded cells in each bar and is able to operate in temperatures as low as 14°F and all the way up to 104° if need be.

Specifications

Each bar includes two load cells(each load cell 50 ohm)
Each bar has two adjustable feet per bar with a 3″ high adjustment
The Cell Output: 3 mV/V
Overweight protection – 200%
Maximum Operating Temperatures: 14 to 104 degrees F
Included Cable to the indicator is 20′

The low profile of 3.5″ allows them to be mounted just about anywhere. The mounting tabs are designed to hold the bars under your livestock chute or platform and are available with the 33″ or 40″ spec dimensions shown below:

Digital indicator

The indicator itself measures a generous 9″ x 5.5″ inches and is made and protected with stainless steel. It has a strong back-lit LCD display for easy reading and comes with a rechargeable 6 V battery and an AC adapter.

The software includes an animal motion hold setting so you may obtain accurate weights even if your cattle are moving in the chute.

The indicator also includes an RS – 232 port which is a full-duplex serial output so you may plug directly into your printer, laptop or other compatible device.

Cables

The kit includes a 20 foot connecting cable with plugging connections. To remove and store the display unit, simply unplug it. It also includes the cable to connect the bars together and is a complete system out-of-the-box!

The cables themselves are protected at each connection point with a steel surround so they can’t be kicked off or broken at the connection itself. See the picture below of the protected ports

Optional Platform Scale

These rugged bars can also be bolted directly to an optional platform to create a free-standing platform scale if desired. The platform weighs approximately 70 pounds is made from aluminum diamond tread deck plate and is further supported with cross members. The bottom of the perimeter is given extra support with 2″ square tubing for extra strength. It also includes cross-bracing through the middle of the platform area.

It can be ordered for either the 33 inch or 40 inch sizes and will weigh almost anything up to 5,000 pounds!

Platform Scale made with Weigh Bars

Since you have your cattle going through the chute anyway, it is no extra effort to grab an accurate weight by installing these chute scale weigh bars to the bottom of your equipment. They are ready to go when they arrive and simply bolt on the bottom of your existing equipment. You can get accurate weight even if your cattle are somehow able to move around while in the chute.

Any flat surface can be made into a platform scale. The adjustable feet allow for a solid foundation and the entire portable scale system comes with a one-year manufacturer’s warranty.

They do include free throughout the lower 48 states and make managing your livestock weight gains and health quick and easy.

If you have any questions about this way bar scale system or any of our livestock scales, just let us know and will be happy to help.

Sales@BarnWorld.com | Barn World | 720.238.2190

Chute Scale for weighing cattle

Posted on September 23, 2010 by Rob

The simple to install and use weigh bars turn your chute into a livestock stock scale instantly. A chute scale is the simplest method of weighing your cattle as they’re going through for health and vet checks.

Weigh your cattle in your chute

As you move your cattle through your working equipment, what better time to weigh them when there calm and confined? It doesn’t require any extra effort on your part. Just glance at the digital scale indicator when it captures the weight, make a note of it and you’re done!

Mounting the weigh bars

The chute scale is made up of two individual weigh bars that mount directly to the bottom of your equipment. The built-in mounting tabs on top of both the 33″ and 40″ models make it a direct connection. It becomes part of your chute but can also be easily removed if desired. They’re literally out of sight and but always ready to use.

The bottom of each weigh bar has two adjustable feet to ensure a level surface. They screw in and out to make up-and-down adjustments.

Weigh Bar Cables

The chute scale includes all the necessary cables for quick and accurate weights. There is a cable that connects the two bars together and a generous 20 foot home-run cable up to the indicator.

The cables are enclosed in a protective sheathing to withstand abrasion and protect against rodents or anything else that might try and chew on them. The quick plug-in connections are made from aluminum instead of plastic for extra strength and durability.
The connection itself is protected by a steel frame so they can’t be accidentally stepped on and broken.

Optional platform

If you don’t have a cattle chute to mount the bars to, you can attach them to almost any flat surface to create a platform scale. There is an optional aluminum platform specifically designed for the system.

It measures 7 feet long and weighs approximately 70 pounds. It’s made with 1/8″ aluminium diamond deck plating and includes an aluminum support tube around the perimeter. There is also square tubing across the middle for extra support.

The platform is designed to mount directly to the 33 inch or 40 inch way bars and is a handy option to turn the bars into a platform scale.

Chute Scale Digital Indicator

A large digital indicator is included for quick and accurate measurements. It is enclosed inside a stainless steel case and uses the industry standard RS – 232 serial output port. You may connect your compatible printer or computer directly.

The indicator measures in 1 pound increments and includes specialized animal motion hold software. This unique feature allows it to get accurate weights even if your animal is dancing around on the scale.

All of the cable connections feature a quick disconnect so the indicator may be stored indoors, even if your bars remain attached to the chute outdoors.

Cattle Scale Features

Other Features:

RS-232 communications port eliminates connectors and provides a direct link
all cables feature a quick disconnect for easy removal
indicator may be disconnected to store indoors
cables are rodent resistant with sheathing
way bars include easy mounting tabs to attach to chutes or platforms
weigh bar cable connections are protected by steel frames
One Year warranty

Chute Scale Dimensions

Call or email sales@barnworld.com for more information and see all of our livestock scales.

Barn World | (720) 238-2190

Cattle Scales and Weigh Bars

Posted on September 23, 2010 by Rob

Cattle Scales come in many different designs and perhaps the easiest to use are the traditional weigh bars. They are easy to install to the bottom of a livestock chute and turn the entire chute into seamless cattle scale.

This system is ready to go right out of the box. The rugged design is built for high use and is extremely tough and dependable. The bars can be mounted to a platform for use as a traditional platform scale if needed. The optional heavy duty aluminum platform option is specifically designed for these bars.

Picture of the Weigh Bars Use with a Platform

The highly durable scale is designed with simplicity, portability, and economy in mind. In just a few minutes the entire system can be setup and ready to weigh.

The standard system includes two weigh bars with built-in handles and 20′ of cable that runs from the bar to the indicator. Each bar has protected quick connectors to cover the attachment ports. It also includes the NEMA 4X stainless steel digital indicator with back-light, and a 1-year warranty!

Specifications

The individual bars come with handles and are lightweight and portable. The quick connect cables make setup and breakdown simple.

The low-profile design includes adjustable feet to ensure a level and firm surface for accurate measurements.

The included animal motion hold software feature allows you to obtain an accurate weight even if your animal is moving on the scale. It can quickly and accurately grab the weight even if there is movement on scale.

The indicator uses the common RS – 232 serial output to connect to computers, printers and other compatible devices.

The high-resolution LCD display is large and easy to use and the cattle scale system comes with a 6 volt rechargeable battery as well as an AC adapter.

These cattle scales are used for weighing livestock in a chute or on a platform. Simply place the bars under an existing squeeze chute or platform and your ready to weigh animals. Standard capacity is 2,500 lb per bar with a total system capacity of 5,000 lb. for the 33″ and 40″ lengths.

The system includes everything necessary to start weighing animals and livestock right away.

Common uses

Livestock chute weighing system mounts to the bottom
Alleyways in handling equipment with cattle, hogs, sheep etc
5,000 lbs capacity floor scale
Platform scale to weigh almost anything – grain, hay and produce

Weigh Bars

Cattle scales that use individual bars like this system feature quick disconnect cables and protected connection ports. The cables themselves contain rodent resistance steel sheathing to protect them from all kinds of critters. The bars themselves are available in 33 inch and 40 inch lengths and include tabs to attach to the bottom of livestock chutes and platforms.

The bars are made of carbon steel and finished with a high grade epoxy paint. Each one has two load cells 2 feet on the bottom for leveling on uneven surfaces.

They measure approximately 3 inches high and include mounting tabs on the tops for easy attachments.

The lightweight and portable system is mounted to the bottom of the livestock chute or platform. The setup includes everything necessary to start weighing animals and livestock right away. It includes a 20 foot cable to the indicator as well as an interconnecting cable between the bars.

Make managing your livestock weight as simple as running them through the chute or mount them to a platform where you can weigh just about anything.

See all of our livestock scales and let us know if we can help with anything at all.

Barn World | Sales@BarnWorld.com | (720) 238-2190

Cattle Blower Review – Circuiteer Animal Groomers

Posted on September 22, 2010 by Rob

The development of a powerful cattle blower led to the creation of the animal blower Ciruiteer line. These tough and portable machines are designed to be used almost anywhere and are great for use with pets and livestock alike.

One of the most popular uses is with livestock as a cattle blower. These compact and powerful units are easy to take to shows and get your animals looking their best in no time.

Quality

The Circuiteer cattle blowers are made with 18 gauge steel bodies are built to last. The electric cleaner company designs and builds durable equipment to offer long service life. These units of the world’s most powerful portable vacuum and blowers of their kind. There sold all over the United States and exported worldwide. They provide ease of operation and reduce grooming and cleaning time in style.

Not only are the cattle blowers built to high standards, the employees themselves have a commitment to quality and loyalty to the company that makes these machines. The average length of service by manufacturing and assembly employees is 15 years. They care about the quality of their work and are extremely experienced in making these wonderful blowers.

All of these models come with a two year manufacturer’s warranty. They really stand behind their products.

Construction

The body of the animal blowers are made with 18 gauge steel and are available in 13 different paint colors! Take a look at all the different color offerings below.

Attachments

All of the circuit here units come with a hose, round blower tip and an air filter for protecting the motor. The Mini and Circuiteer I come with a 10′ hose while the II and IV come with 15′ hoses.

Motors

The cattle blowers comes standard with two motors for ultimate power except for the Mini-Circ which is built for lightweight portability in a smaller package.

The Mini-Circ animal blower is an excellent blower for use almost anywhere. It’s small size makes it easy to transport and yet maintains excellent power with its Lamb motor. The motor only draws 9.5 amps yet creates an exit speed of 32,500 feet/min. That works out to 114 CFM and will make quick work of grooming.

Other uses we don’t typically consider is that of inflating rafts, blowing off workstations and even removing water from recently washed vehicles.

The larger Circ I, II and IV cattle blowers have the choice of using one or two motors.

You can use just one motor for sensitive areas and both motors for higher airflow and maximum drying.

The Circuiteer I is an excellent unit for grooming large animals. It’s also great for cleaning up around the farm and has many industrial uses such as blowing parts and personnel.

It uses 120 V standard but is available in 220 V if needed. It also has a 120 V utility outlet on the body of the blower you may plug-in an extra set of clippers or even charge your phone while working!

The Circuiteer II model is still portable and lightweight but Packs more power and can move at over 58,000 ft./m at the nozzle. It draws approximately 17 A and also has a 120 V utility outlet built into the body of the blower for your accessories.

The Circuiteer IV Cattle Blower Is the newest addition to the line. It has two 120 V outlets built into the body and in comes in the new hammer tone paint colors: Gold and silver.

This powerful machine is excellent for all types of blowing and drying. The two motors will move an amazing 245 CFM using only 19 amps.This will quickly become your favorite cattle blower for use at all your prestigious livestock shows!

Comparisons

Take a look at the performance comparisons below between the different models. You may click on the model link shown in blue on the left see more details for that particular model.

Animal Blower Comparison Chart

Click	CFM	Feet/Min
Models	Volume	Speed	Heat	Watts	Amps	Volts
Mini Circ	114	32,529	120F	1.14	9.5	110/120
Circuiteer I	186	42,750	122F	1.782	14.85	110/120
Circuiteer II	218	58,329	126F	2.04	17	110/120
Circuiteer IV	245	60,921	122F	2.098	19	110/120

This line of animal blowers offers a high quality selection while maintaining excellent portability for use almost anywhere.

Click the following link to see all of our animal blowers and let us know if we can help with anything at all.

Barn World | Sales@BarnWorld.com | 720.238.2190

Hay Bale Spears clamp on tractor bucket

Posted on September 21, 2010 by Rob

Quick attach hay bale spears clamp directly on to your tractor bucket and allow you to move large hay bales with ease. The patented quick clamp allows you to turn your tractor into a hay bale spear work horse.

The spears have the patented ‘C-clamp System’ that lays flat in your tractor bucket to disperse the pressure over the largest surface area possible. They also include under bucket support beams to ensure loads are distributed across the entire platform.

The spears are powder coated for increased longevity and durability.

The clamps use a machine threaded bolt mounted to an easy to use handle to make a quick and secure connection.There is no reason to remove your existing bucket when you can easily attach these bale spears with little effort.

Barn world carries the round bale and square bale bucket attachments for both types of hauling.

Round Bale Hay Spear

The round bale spear has a 2,000 lb lifting capacity and yet it only weighs 125 pounds. The working length of the spear is 33″ and it measures 28″ wide. The overall length is fifty four inches and the height is twenty inches.

Specifications

Length: 54″
Width: 28″
Height: 20″
Length of spear: 33″

Round Bale Spear Video

Square Bale Spear

Square bales require additional support on the bottom to keep them from tipping while in transit. This fork has two spears along the bottom instead of the single spear like the round bale loader. This ensures stability throughout the lifting and carrying process.

The overall weight for this configuration is 140 pounds. It too has a 2,000 pound lifting capacity and a 33 inch working length.

The most notable difference between the two designs is the extra width across the bottom that the dual spears require.This configuration has a width of 40 inches but only 9 1/2 inches in overall height.

Specifications

Lifting Capacity 2,000 pounds
Weight: 148 pounds
Length: 54″
Width: 40″
Height: 9.5″
Working Length: 33″

Video Review of the Square Bale Spear

Get a set of tough hay bale spears to fit the type of bales you use. The round and square quick attach spears allow your bucket to easily move heavy hay bales with ease.

If you’d like a quote with shipping directly to your door, give us a call or email your request to Sales@BarnWorld.com and we’ll be happy to help.

Barn World | 720.238.2190

Cattle Guard Options

Posted on September 21, 2010 by Rob

Barn World has a large selection of cattle guards to choose from. Once installed, you’ll no longer have to deal with the inconvenience of opening and closing gates again! Pass through your fence-lines with ease while your cattle remain securely contain with these livestock barriers!

There are many different types, styles and options available when selecting a cattle crossing for your property. Load ratings, boxes, wings and foundations are all available options.

Take a look at some of the general styles and features available below and if you’d like a quote with shipping or have any questions at all, please don’t hesitate to contact us at Sales@BarnWorld.com or call anytime 720-238-2190.

Rated Cattle Guards

The H-rated cattle guards are designed for highway use and certified to meet DOT requirements for public road projects. There are also designs with higher, heavy-duty load ratings for off-road use for BLM, USFS, NP, and US Military installations.

The off-highway rating requirements are much higher than the H-ratings. They’re used for rugged service in commercial applications such as mining, forestry, agriculture, and petroleum production.

Standard Cattle Guards

Barn World also carries a less expensive option for private property. They’re built for everyday use on private driveways and farms. They carry fully-loaded semis, farm equipment and everyday traffic on private land. These are much more economical and very popular for driveway use.

The standard cattle guards are made of NEW, 3″ outside diameter, schedule 40 steel. All round top rail cattle guards may be ordered with optional wings, integral box, or the removable box.

Cattle Guard Options

There are a lot of available options to fit individual site requirements. An effective livestock barrier requires load carrying considerations as well as some optional features to be effective. Take a look at some of the more common illustrated below.

Cattle Guard Wings

The wings prevent your cattle from walking around the connection between the fence and the cattle guard itself. They physically transfer the vertical barrier that your fence line creates into the horizontal livestock barrier the crossing creates in the road.

Without this physical transition, cows could simply step around the end post that terminates at the cattle crossing and easily escape to greener pastures.

Box Options

There are two different box types available: integral and welded.

The integral box is a steel skirt welded to the perimeter of the cattle grid. It does not add any structural integrity but is simply there to keep dirt from sliding in underneath the grid when lay directly on the ground.

Installation is as simple as laying directly on the ground and creating a dirt ramp on either end so vehicles may cross.

These are typically used when an excavated vaulted area is not necessary. This type of installation is common in low traffic areas such as driveways, remote cell phone towers and oil operations. Temporary installation is also benefit from the ability to pick the guard up and move to another location. This makes it popular at construction sites.

With the removable box, you may lift the grid from the installation without disturbing the surrounding area. Lift the grid to clean underneath. It’s a handy and time-saving feature if you expect a lot of debris to accumulate in the area.

Cattle Guard Foundations and Footings

one of the most time-consuming portions of installing a cattle guard is the necessity of creating a solid foundation to transfer weight to the ground. We are now able to ship precast concrete footings with cattle guards directly to the job site.

Installation is easy. Lower the concrete directly into the ground to provide structural support. They are large and heavy items that require a mechanical means of unloading upon arrival. They are quite a bit heavier than the cattle guards themselves.

The foundations have precast anchor bolts included to match the flat top rail cattle guards that they ship with. This allows you to bolt them down directly in the field without any drilling at all.

Snow Plow Strips

Snow plows can be damaging to a steel crossing. Install plow strips in heavy snow areas so they may cross over the guard with minimal interference and wear.

ATV cattle guards

The off-road cattle crossings are very unique. You to simply set them in the middle of your fence line and tie your fencing to the vertical posts. It sets directly on the ground and the raised rails create a formidable livestock barrier.
Barn World has a cattle guard to meet your needs. Please call us (720) 238-2190 with your questions and to obtain shipping quotes. We can also provide professional bid packages for large company, military, and government programs and carry a large selection for all of your livestock equipment needs.

Email your quote requests to Sales@BarnWorld.com

Pipe Fence for a decorative continuous fence

Posted on September 20, 2010 by Rob

Pipe Fence has been used to dress up horse pastures and ranches for years. It’s heavy enough for work facilities and attractive enough as a decorative fence. You’ll be pleased with the durability, strength, quality and elegance of our Gold Quality Continuous Fencing. Whether you use it for a pasture fence, livestock fence or a horse fence, it’ll dress up your property immediately and for years to come.

Pipe fence pasture corner

Description

The Hi-Qual continuous fence is available in 10 and 20 foot lengths with options of 1-1/2″ or 2″ pipe and 4, 5 or 6 rail configurations. The strong and fantastic looking fences have welded, notched vertical supports and are easily installed on wood or metal posts. They give the desired appearance of a clean, continuous fence line.

Corners are made with either 45° or 90° elbows to allow it to be used in almost any application.

Built with notched and welded connections and coupled with a powder coated finish, these durable steel fences will provide years of solid use and good looks.

Construction

These strong and glamorous continuous fence panels are made from 16 gauge, 50,000 psi premium steel tubing.They are available in five or six rail configurations and in inch and 1/2 or 2 inch outside diameters.

The panels are built in lengths of 10′ or 20′ and each panel has notched and welded uprights for extreme strength and stability. The end of one panel has a smaller diameter to slide directly into the next panel for a seamless look. Even the corners are interconnecting with 45° or 90° corner members. Below is an installed 45° corner:

They are powder coated for extra durability and longevity in a variety of colors upon request.

Pipe Fence Specifications

New steel tubing is 16 gauge, 50,000 psi
Configurations include 5 or 6 rails and 1 1/2″ or 2″ diameters
Available lengths are 10′ or 20′ long
Slide in connections for a seamless finish
All uprights are notched and then welded for exceptional strength
Seamless corner members are available in 45° or 90° configurations
Powder Coated for extra protection and longevity
Available in numerous colors to complement your existing look

Picture of the continuous fence panels

Pipe Fence Video Review

Below is a great video overview that illustrates the features and construction of the pipe fence. These high-quality panels are easy to install and over-built to last for years in your most active pastures.

The product we want to discuss today is Hi-Qual continuous fence.

This is an example of the two inch, five rail configuration. It’s available also in two inch, six rail as well as in the five rail, 1-1/2″. All three configurations are constructed out of 16 gauge, 1017 high-tensile, high-carbon steel.

You’ll notice that in the continuous fencing, we’ve incorporated the same notched vertical supports that you saw the livestock gate and panel line. The panels come in 10 foot and 20 foot lengths and one end is “swedged” or male. This is built so it slides into the next piece and as you install it on wood or metal post, gives the appearance of being one continuous panel.

Some of the accessories that you would incorporate into your design: clips, elbows and posts.

Obviously, we need the clips to hold the panels to the posts. The 45° and 90° elbows create the continuous finished look.

You can see there are many applications for Hi-Qual continuous fence. They’re commonly used a perimeter fence, a pasture fence, corrals and even non-agricultural uses such as in oilfields.

With these continuous fence panels, you can achieve the longevity of a heavy-duty metal panel. They last longer and are more durable than any wooden or vinyl fence that you would put up.

Visit BarnWorld.com and if you’d like a quote with shipping or have any questions, feel free to contact us at Sales@BarnWorld.com or call (720) 238-2190 today!

Mineral feeders – animal nutrition in the pasture

Posted on September 20, 2010 by Rob

MINERAL FEEDERS

Barn World offers the heaviest ground mineral feeders available. This large feeder is great for cattle, all types of livestock and also horses! Almost all your ranch animals will quickly learn to love and access the feeder.

Mineral Feeder Specifications

It’s heavy duty design is built for cattle, but it can easily be used by horses and small animals too. It has three very large compartments to contain up to 200 pounds of salt mineral in block or loose form. The large flap protects it from the elements year-round.

Mineral Feeder Flap

The 41 inch diameter flap is designed for constant use by large herds. It’s made with thick rubber and has extra support around the pin to prevent tearing. The flap is protected from over bending with a set of included washers. The washers protect it from creasing near the mounting pin and extend the life of the flap.

The high quality polyethylene construction of the flap is designed to be used outdoors in direct sunlight and throughout the winter months as well. If it ever does wear out, it may be ordered individually so you don’t need to replace the entire feeder.

Mineral Feeder Base

The compartments section of the mineral feeder has a very low profile of 15 inches. It’s specifically built this way to prevent tipping or spilling in the pasture. It also has a tapered shape and the large 38 inch diameter adds to the stability of the feeder.

The high quality polyethylene construction includes three built-in anchoring points molded directly into the base. They allow it to be secured to the ground if desired. The picture below shows the interior and the three large compartments that can hold up to 200 total pounds of dry minerals.

Polyethylene construction means it’s impervious to corrosion or rust and creates a long-lasting, dependable outdoor feeder. It can be left in the pasture year round and will protect your minerals from mother nature with ease.

See all of our mineral feeders here

Summery

The Sioux Steel Ground Mineral Feeder is a heavy duty design that’s been around for decades. The low profile keeps it upright with even the most rambunctious livestock use in the field.

It uses extremely tough and UV resistant polyethylene for extreme longevity. The flap is designed for constant and repeated use with large herds and may be replaced individually if necessary.

Fill the feeder with your minerals and supplements and leave it for your animals to do the rest.

We carry a large selection of mineral feeder replacement parts, And if you have any questions, would like a quote with shipping directly to your door or if we can help with anything at all, please don’t hesitate to ask.

Barn World | Sales@BarnWorld.com | 720.238.2190

Floor Insulation Panels for Radiant Heat

Posted on September 20, 2010 by Rob

Radiant heat is one of the most economical means of heating a home or workplace. Floor Insulation is critical for keeping heat from being absorbed into the ground. These radiant floor insulation panels direct it into the slab where it’s needed and prevent heat loss to the ground below.

The floor panels have knobs molded into them designed to hold various sizes of Pex Tubing at a uniform-designed distance. This allows even heat distribution and holds the tubing in place during installation and while covering with cement. The raised knobs protect the tube during installation and make planning and layout easy.

Installing the panels is easy and we’ve included an overview and some guidelines below.

Insulating Floor Panels

Floor Insulation Installation

The first step during installation is planning the layout of the panels. They’re rectangular and measure 23″ x 49″ with an effective insulation area of 23″ x 48″. The edges overlap to lock together and keep the forms from moving when walking on or pouring cement.

Floor Panel Layout

The panels are easily cut for rectangular or square rooms and even in irregular rooms, they’re easy to fit. The boards are mostly Styrofoam with a vapor barrier on the bottom that’s easy to work with. Below is a picture of a room with the floor insulation laid out and the PEX Tubing run where the heat is to be radiated.

Installing the Pex Tubing

Create a floor plan of where the radiant heat should be introduced to the slab and place the PEX. Most installations call for an even distribution of the heat, but a contractor should be consulted if more is desired in a certain area over another. The tubing can easily be set closer together in that area to provide more heat if needed.

Each panel has knobs that hold the tubing securely in place during construction. It will protect it from wheelbarrows and work boots and provide a uniform distance between runs. The knobs are designed to accommodate most tubing sizes from diameters of 3/8″ up to 3/4″. Consult your heating boiler for the best match of tube size.

Installing the Pex Tubing

Cement INSTALLATION

Once the floor insulation panels are in place and the PEX is installed, you’re ready to plan for covering it with cement. This process should be done by a qualified contractor familiar with this type of installation. A recommended minimum of 1.5″ of coverage is required through the floor. It can go pretty quickly and once you start, you’ll need to finish!

Below are pictures of the cement being floated on top of the panels. It can be a labor-intensive process and require immediate and constant attention.

concrete covering radiant floor insulation panels

installing cement on top of floor insulation panels

workers covering floor insulation with cement

Once the floor has cured, the majority of the work is done. You’ll be able to test your radiant heat boiler and make any flow adjustments deemed necessary.

Benefits of Radiant Heat Floor Insulation Panels

The quietness and efficiency of radiant heat are undisputed. The uniform heat throughout the floor will provide comfort and utility savings for years to come. The panels themselves have a 10-mil vapor barrier polystyrene film to prevent moisture transfer and their real value is their insulating properties. See the chart below for details

Floor Insulation Ratings

The panels are available in three different R-values. Not all installations require very thick, 3″ panel insulating properties so other alternatives are offered.

Floor Panel R-Ratings

R-6 – 1″ floor panel – overall 1 – 7/16″
R-10 – 2″ floor panel – overall 2 – 7/8″
R-15 – 3″ floor panel – overall 3 – 7/8″

Choose the panel that’s right for your climate and heating needs.

Shipping

The insulation is very lightweight and can be shipped all over the United States. They’re packaged on pallets, in UV protective bags as shown below. Each bag is fairly light (30 pounds or so) and a lift-gate service is available to lower an entire pallet full (8 bags) to the ground upon arrival if necessary.If you’d like a quote with shipping right to your door, please let us know and we’ll be happy to help. Email Sales@BarnWorld.com for a quote with shipping and quantity discounts or call anytime: (720) 238-2190

Creep Feeder

Posted on September 20, 2010 by Rob

A quality Creep feeder is essential for making sure your younger animals get the nutrients they need. The best feeding environment for calves is one away from the adults and these feeders are designed to provide just that. The proper creep feeder will have your calves ready for market sooner and in high quality condition.

The design uses a outer ‘cage’ to keep adults from being able to access the feed trough area. The cage has outer bars that are spaced so calves and smaller animals can enter but larger animals cannot. They also use an adjustable horizontal entry bar that can be moved up as the animal grows. The cows and larger animals aren’t able to fit underneath so only the young ones can enter.

Once through the entry area, the calves are free to eat the provided minerals in the trough free from the larger animals. The ability to eat in a stress-free area allows them to consume minerals and supplements for maximum healthy weight gains.

These feeders are built to have your calves ready for market sooner and in higher quality condition. They also are used to provide health supplements to smaller animals in need of specific feed or supplements.

Below are a few examples of the feeders that can be shipped throughout the US. If you’d like a quote with shipping to your front door, let us know and we’ll be happy to provide one for your review.

Single Sided Creep Feeders

The most common design has a single side for feeding. It allows the feeder to be filled from outside the guarded feeding area. That may not seem like a big deal but when you’re trying to fill it or any feeder, your rambunctious eaters can get carried away and step all over you. It’s far better to fill from outside the trough area to prevent any accidental injuries to you or your calves.

This style has holding capacities of 500 all the way up to 1,500 pounds.

Double-side Creep Feeders

These are designed to feed large groups of animals and have much larger capacities than the single-sided design. These larger capacities range from 1,200 to 3,000 pounds!

The extra size and capacity means you don’t have to fill the feeder as often if used for smaller groups. It also means you can easily feeder those large herds without repeated fillings.

The double-side build means there’s twice the feeding space available as animals can use both sides. The two individual troughs are both fed by the center storage area. This is great for not only large groups but can also be used in a fence-line to feed two separate pastures or pens at once.

Deer Feeders

Nutrition is very important for calves, sheep, goats as well as deer. This unique feeder is designed without the surrounding pen to make sure they have free access to supplements. It’s used for wildlife and game management or for raising in captivity. Use this feeder to ensure your entire herd gets the necessary protein they need.

Large bucks and whitetail deer need protein all year round and especially when recovering from the rut. It also helps with antler growth during the 200-day growing period.

Creep Feeders

Small animals need proper nutrition for a health start to life and can require access to mineral and supplements without competition from larger adults. This separate feeding area also keeps your larger animals from downing all the expensive feed before the young ones who need it can get to it.

Please let us know if you’d like a quote with shipping right to your farm or ranch and we’ll be happy to forward one for your review.

See all of our creep feeders and contact us anytime at Sales@BarnWorld or (720) 238-2190.