This product is not available for purchase.

This highly durable cattle scale is designed with simplicity, portability, and economy in mind. In just a few minutes the entire system can be set up and ready to weigh. The standard system includes two weigh bars with built-in handles and 20' of home run cable, a quick connector, a NEMA 4X stainless steel digital indicator with backlight, and a 1-year warranty. It also comes with a 6 V rechargeable battery and a 12 V 800 mA Adapter.

This fully portable system is commonly used for livestock weighing - simply place the bars under an existing squeeze chute or platform and you're ready to weigh animals. The standard capacity is 2,500 lb per bar with a total system capacity of 5,000 lb. for the 33" and 40" lengths.

See all of our other livestock scales and take a look at more features below!

Features

Livestock chute weighing system.
Used in Alley ways for Cattle, Hogs, and Sheep.
5,000 lbs capacity floor scale - grain, hay and produce.
Measures in 1-pound increments
Used as a portable weigh system (4-H, pasture to pasture, fairs, and more.)
Mount to any platform
33" load bars COMPLETE SYSTEM - weigh 75 lbs - CURRENTLY SOLD OUT
40" load bars weigh 83 lbs - CURRENTLY SOLD OUT

WE APOLOGIZE BUT THE WEIGH BARS ARE CURRENTLY SOLD OUT

We are unable to accept new orders at this time

This product ships free

The Weigh Bars Ship Free in the Lower 48 States!

For the shipping total on the other products, please chat below, call, or email and we'll reply with one shortly!

Order replacement cables here: Bar-to-Bar and Bar-to-Indicator and the Digital Indicator here.

The optional platform weighs approximately 70 lb. for 40" and 60 lb. for 33". It is 1/8th inch thick, has a diamond tread deck plate with 2" square Aluminum tubing around the perimeter, and a 1.5" square tubing is used for cross bracing. It is designed to mount to the weigh bars.

FREE SHIPPING IN THE LOWER 48!
(free shipping does not include an optional platform or parts)

Weigh Bar Details

Features:

Easy access RS-232 communications port. (No more fumbling with hard-to-reach connectors.)
Quick Disconnect at Digital Indicator for easy removal. (Indicators can be stored indoors and attached when needed.)
Cable Quick disconnects at weigh-bar junctions. (Makes disassembly a snap.)
Rodent Resistant cabling. (No more critter-induced cable problems.)
Easy Mount tabs on both the 33" and 40" weigh bar systems (Attach chutes and platforms with ease.)
Protective steel shields at cable & weigh bar junctions. (Protects connectors from damage from transporting system.)
One Year warranty

Specifications:

Light Weight & Portable: Can be positioned to weigh easily, or store when not in use. Each Weigh Bar is fitted with an easy carry handle; this provides quick and easy setup and breakdown for total portability.
Low Profile: Less than 4" high. Supplied in pairs. Total capacity of beams is 5,000 pounds in both 40" and 33" lengths.
Push Button Tare: Simple one-button tare provides for acquiring the tare and subsequent display of Gross/Net Weight values.
Animal Motion Hold: Special software allows you to obtain an accurate weight even if the animal keeps moving on the scale.
Full Duplex RS-232 Port: The Full duplex RS-232 serial output provides on-demand output to a printer, computer, or other compatible devices.
Simple Parts Weighing: Speed and Accuracy are combined with the simple one-step counting function.
LCD High-Resolution Display: Large easy-to-view .75" high LDC backlit display.
Power: Comes with 6 V rechargeable battery and AC adapter

Weigh Bar Livestock Scale Construction

Construction: Carbon steel, high-grade epoxy paint finish. The digital weight indicator is stainless steel NEMA 4X construction.
Weight sensors: Two loaded cells per weight bar (each load cell 50 ohms)
Load Feet: 2 per bar, 3" high capacity
Load cell Output: 3 mV/V
Overload protection: 200%
End loading: 100%
Operating Temperature: 14 to 104 degrees F (-10 to 40 degrees C)
Interface Cable: 20-foot cable included
Two load cell summing boxes

Digital Indicator

Load Cell Excitation: +5 VDC
Load Cell Current: Drives up to 4-350 ohm cells
A/D Resolution: 1:260,000 internal counts
Display Resolution: Up to 50,000 counts
Key Functions: lb/kg, Zero, Net, Gross, Tare, Print
Alerts: low battery, center zero, gross, tare, net, stable, pieces, pound, ounces, kilograms, and percent accuracy.
Indicator Dimensions: 9.0" x 5.5" x 2.9"
Indicator Construction: Stainless Steel 304

Weigh Bar Avantages

weigh bar diagram of advantages and livestock scale brochure

Dimensions:
cattle chute scale weigh bar diagram

Optional Heavy Duty Aluminum Platform to complete the scale system if needed.

Livestock Scale Weigh Bar Specifications

Livestock chute weighing system.
Used in Alley ways for Cattle, Hogs, and Sheep.
5,000 lbs capacity floor scale - grain, hay and produce.
Measures in 1-pound increments
Used as a portable weigh system (4-H, pasture to pasture, fairs, and more.)
Mount to any platform
33" load bars weigh 75 lbs
40" load bars weigh 83 lbs - CURRENTLY SOLD OUT

The optional platform weighs approximately 70 lb. for 40" and 60 lb. for 33". It is 1/8th inch thick, and has a diamond tread deck plate with 2" square Aluminum tubing around the perimeter,r and a 1.5" square tubing is used for cross bracing. It is designed to be mounted to the weigh bars.

Chute Scale Weigh Bar