Barn World had a large selection of livestock waterers for keeping your animals healthy for optimal weight gain. Choosing the right waterer is easier with this large selection.
BIGspring – ENERGY FREE WATERER – 60 Gallon with heat
The large 60 gallon Big Spring Waterer is a constant-flow watering system ideally suited for free-stall dairy operations and large feedlots. If you raise beef or dairy cows, the BIGspring model is perfect to fit your needs.
LilSpring WATERER – Double-Sided 6 GAL (with heat in GREEN)
Smaller waterers in the Lil Spring waterer models are ideal for small animals or groups of small animals — such as goats, llamas, ponies, horses, and many others. Lil’Spring models can accomodate multiple pens by installing them in a split-fence application. We offer them as single or double sided waterer.
MiraFount – ENERGY FREE WATERER – 4 HOLE Removable
Our Energy-Free Waterers:
E-Founts are the most economical electric heat waterers available today. The E-Fount is equipped with a 50 watt heat element and thermostat. E-Founts only require 4 kilowatts of electricity during a week of -25 degree F temperatures. This model is ideally suited to operations with just a few animals drinking infrequently or if extreme cold weather conditions are persistent.
We also offer the MiraFount models which are patterned after their first energy-free livestock watering systems, built more than 30 years ago. These small. medium and large capacity watering systems are ideal for beef operations, dairy herds and other livestock.
Hoof care the easy & comfortable way! Easy on the horse and the user, the Hoof-it® Stand gives you both the post and cradle integrated into one, innovative hoof stand. Do yourself a favor! Take the pain out of your back and knees with the New Hoof Stand from HOOF-it® Technologies
The HOOF-it® ‘All in One’ Hoof Stand, designed by Farrier Steve Samet, features a shock absorbing, integrated rubber cradle and hoof post into one easy to use unit.
The Hoof Stand provides a stable and safe support for the horse, allowing it to relax without putting all of it’s weight on you.
For additional safety and stability when working with the Hoof-it®Stand try the following: * keep on foot on the base unit when working with the Hoof® Stand * do not leave the horses leg or hoof in the cradle or on the stand, when unattended.
Benefits for Farrier’s, Veterinarians and horse Owners who use the HOOF-it® Hoof Stand:
√ Easy to use “All in One” innovative, design integrates both the post and cradle in to one.
√ The innovative design of the HOOF-it® Hoof Stand dramatically reduces your risk of getting injured during hoof care tasks.
√ The HOOF-it Stand is ideally suited for use with all types of horses, including older horses that require special support and comfort during hoof care tasks.
√ The rubber cushioned Cradle fits different hoof sizes and hugs the hoof.
Let HOOF-it® Hoof Stand deal with the majority of the horses weight during any type of hoof care tasks, rather than your back or knees.
Barn World has a large offering of cattle guards for all different types of applications. Called by many names – Texas gates, cattle grids, animals guards and more, but they are an important part of livestock control and ease of use when crossing a fence-line.
Cattle guards fall into two basic groups: rated cattle guards and non-rated cattle guards.
Rated Cattle Guards
An HS20 and HS25 rated cattle guards are designed for highway use and certified to meet the specifications needed for State and Federal requirements such as DOT, BLM, USFS, NP, and US Military installations. They will provide years of rugged service in commercial applications such as mining, forestry, agriculture, and petroleum production. They are also the product of choice for residential usage where city, county, or state regulations require the HS20 rating.Certified structural steel is used in the manufacture of all Barn World’s HS-20 rated Cattle Guards.
Standard Cattle Guards
Barn World also carries a less expensive option for private use such as washouts and driveways. The Standard 6’and 8′ wide cattle guards are made of NEW 3″ Schedule 40 steel but do not carry the governments highway rating designation. All Flat Top Rail Cattle Guards may be ordered with optional wings, integral box, or removable box.
Made for easy installation. No need to dig a hole – simply cut your fence and lay the cattle guard on the ground.
Specifications:
1 1/2 x 11 gauge square tubing
72″ wide X 91″ long
Ramp is 14″ tall
Overall width of the guard including the wings is 87″
Comes standard with a grey enamel finish
Spec Cattle Guards
Our 7.5′ and 8′ spec cattle guards meet current AASHTO load ratings and are suitable for all types of applications where a square pipe is desired including heavy duty logging roads. They may be ordered with optional wings or clean-out line.
All cattle guards may be fitted with plow strips that allow plows to cross over the guard with minimal interference and wear.
All cattle guards may be outfitted with a removable box for easier cleaning as an option.
Barn World has a cattle guard to meet your needs. Please call us (720) 238-2190 with your questions and to obtain shipping quotes. We can also provide professional bid packages for large company, military, and government programs and carry a large selection for all of your livestock equipment needs.
Hay tarps protect your investment from harmful elements and keep your livestock hay fresh year-round.
Barn World offers the extremely durable Bull Flex hay tarp. It keeps the value-minded hay tarp customer happy yet provides a tough 7-ounce fabric for those that demand toughness.
These hay tarps are available with strong tie-down tabs and come complete with a tie-down chuck-wagon end to keep it snug in the strongest of winds. Barn World also offers the Super Cinch tie-down kit for extra security. The quality of this hay tarp is much, much higher than those at the typical farm supply or livestock supply store.
When securing your haystack, the Bull Flex hay tarp has the best of both worlds. It includes 2” high strength web loops that are spaced 3’ apart. These webbed loops are 300% stronger than traditional grommets and will not tear out. In addition, down both sides of the hay tarp is a pocket designed to accept pipe. This allows the bottom sides of the feeder to be secured further with the pocket by tying it to the pipe. You simply slide a pipe into the pocket.
For the ultimate in protection, hay stack hay curtains can be added. They’re available in a variety of sizes to protect the side of the stack and keep your livestock hay fresh for feeding.
For everyone that relies on hay to feed their livestock, this heavy-duty tarp will protect your investment from spoilage, mold, and bacteria that can ruin a harvest. Be sure to get a hay tarp from Barn World so you eliminate the risk of feeding spoiled hay to your livestock. This can cause serious health problems for your animals. Protect your investments in hay and livestock with a hay tarp today.
Visit www.BarnWorld.com to view all of our livestock equipment and hay tarps.
5 Star saddle pads made from 100% wool are a two piece construction to ensure the best contour to your horse’s back as quickly as possible. There is no breaking-in period, these saddle pads are comfortable and effective from day one.
Eliminating spinal pressure on your horse or mule is the benefit of the two piece design. It provides a great fit for you saddle without compensating with over-cinching. Your horse or mule will love this unique feature and you’ll notice the attention to detail as each saddle pad is handmade to order.
Types of Saddle Pads:
There are a lot of different riding disciplines out there and selecting the proper saddle pad for your type of riding is important for the best in fit and performance.
Made right here in the USA, these and all 5 Star saddle pads are 100% wool. You may choose from as thin as 1/2″ to the very thick 1-1/8″ pad. Every pad is made in all four colors and offer a choice of embroidery and standard leathers in four different colors.
Fitted for a mule, jack and donkey’s back line, these 100% wool saddle pads are made for flatter backs, withers and the thick shoulders of these animals. They also come in all four colors, offer embroidering and your choice of four different colors of standard leathers.
If high performance is at a premium, a barrel racing saddle pad is a great fit. It will keep your horse comfortable while performing at maximum effort and won’t let your saddle slip around on you as you go. You may specify if you’d like the corner rounded on the front, back or both to fit your personal preference. Four different colors of standard leather, embroidery options and four colors of saddle pad are also available to you on all saddle pads.
The English saddle pads provide the greatest comfort possible for both horse and rider when riding English. They’re available for hunter/jumpers, dressage and all purpose riding as well.
English Saddle Pad
At Barn World, we have a large selection of saddle pads, cinches and breast collars. Barn World is much more then livestock equipment! Please visit www.BarnWorld.com or call (720) 238-2190 to help with all of your tack and livestock supplies.
During this time of year, it’s important to keep your animals well nourished to keep them healthy. Barn World has a huge choice of mineral feeders for all types of livestock. Make sure your animals are healthy with a Barn World mineral feeder.
This feeder is the largest and heaviest in the business. It’s not uprising then that it’s also the most durable and easily used by horses and horned cattle alike. It has a 3/8” heavy duty 41” flap that covers and protects the solid minerals and supplements beneath. The feeder base itself is 38” wide, 15” tall and weighs 53 lbs! It comes with three compartments that carry 200 pounds of salt, mineral or other solid supplements.
The large feeder rotates 360 degrees to protect your expensive supplements from the wind and weather. It sits on a wide and sturdy 48” square tubular base made with 2” – 16 gauge steel tubing. The steel is rated at 50,000 psi for incredible strength to provide long-lasting stability. The top lip of the feeder is 23” above the ground to allow calves and smaller animals easy access. The hood opening is beveled and is 28” x 24” so even the biggest cattle can easily get their nourishment. This feeder weighs 73 pounds and is available with an optional face fly kit in either canvas or hanging string designs.
This unique mineral feeder is a free standing feeder that holds a polyethylene tub. It’s approximately 3′ tall and has 3′ legs to allow a full rotation to protect it’s contents from the wind and weather. The rubber tub holds up to 100 pounds of mineral bulk.
This large, 280 gallon liquid mineral feeder includes two lick wheels and mounting brackets. It’s made with thick and sturdy plastic and is designed with integral ribs for support throughout. It’s incredibly tough and built to be out in the pasture year-round with the largest bulls. The polyethylene construction means it stands up to abuse and will not rust, corrode or rot.
Make sure your livestock are getting the supplements and nourishment that they need all year long with a mineral feeder.
Visit www.BarnWorld.com or call (720) 238-2190 for all your livestock equipment needs.
Choosing a cattle guard for your project doesn’t have to be overwhelming and we’re here to help. Here is a quick review of the subtle and not-so-subtle differences between cattle guard offerings. There are two common types of cattle guards: Boxed and Flat. Each has its’ own installation requirements as detailed in our installation post.
Boxed-style cattle guardsare built to lay on flat ground. A steel frame is welded all the way around the perimeter to prevent dirt and debris from migrating their way underneath. It is not to support the guard but is there just to keep the dirt out.
The boxed cattle guard will rest directly on its C-channel beams. To help with drainage, a gravel underlayment is recommended. These types of cattle guards are very popular with semi-temporary installations such as construction sites or limited access areas. They are also used as wheel wash-outs for trucks entering public roadways. They are designed to mount to a foundation over a vault and are used in permanent installations and public roadways.
Please read the post on installing flat cattle guards or visit our informational website www.Cattle-Guards.com for more information on the footing and foundation requirements. Flat cattle guards will rest entirely on the footings and pour a concrete foundation. The weight of the crossing traffic is transferred from the pipes to the structural beams, to the footings, and then to the ground. It is important that each footing is supporting the length of the beams for proper weight transfer.
Common points: Both flat and boxed cattle guards have the same strong values. The boxed merely has a steel skirt welded to it and rests on the ground rather than having permanent footings to rest on. Cattle guards are usually made with 4-1/2” OD pipe and will use 9 pieces to cross the beams or they may be built using 3-1/2” OD pipe and 11 total pieces. The spacing between the pipes is nearly 4” on average and the total height from the top of the pipe to the bottom of the support beams is nearly 12”.
The cattle guards usually come in gray enamel, but other colors are available on request. The most popular request is for safety yellow as it is sometimes required for government projects and construction sites. Flat cattle guards weigh approximately 100 lbs. / linear foot – so for example, a 10’ cattle guard will weigh about 1,000 pounds. If the guard is boxed, a good rule of thumb is to add 10 pounds per foot.
If wings are added as an option, estimate 100 lbs for each wing, or 200 lbs total.
Using Cattle Guard with other Animals
Deer:Cattle guards can be effective with other animals other than cattle. One of the most common requests is for deer. Unfortunately, deer are very athletic animals and are fantastic jumpers. An 8’ guard (in the direction of vehicle travel) will not stop or deter a deer from jumping it. The best arrangement to keep deer out is to set two 8’ cattle guards side-by-side to create a barrier of 16’ in the direction of travel. Cattle guards are easily bolted together.
Our experience has been that most deer will not venture over the guards that provide 16’ or more of ‘discouragement’. They are easily bolted together to provide extra distance in the direction of travel and a visual deterrent to jumping
Goats and horses: Although they are commonly used with horses, we do not recommend them for horses. They do provide the same effective barrier as with cattle, but because a horse hoof is more slender than a cow’s, they have the potential to slide between the 4” spacing of the top rails and become trapped. As a ‘flight animal’, they will struggle to get out and can unintendedly break their own leg in the attempt.
A cattle guard will almost always deter a horse, but on the off chance it decides to try and cross, it can expose it’s fragile leg to breaking during the struggle to escape. We do not want to see anyone’s animal put down because they got stuck in a cattle guard and would instead recommend a gate.
Goats on the other hand are very sure-footed animals that can walk right over a cattle guard without thinking twice. Dogs are also pretty adept at crossing.
Taking Delivery of a Cattle Guard
Please remember these very large items are very heavy. When they ship, they are usually on a boxed semi-truck or a flatbed trailer. The trucks cannot unload them at the point of delivery. It is therefore important for the customer to have equipment capable of unloading these large steel structures.
In some cases, it’s possible to drag the cattle guard out of the trailer, lower one end to the ground then the other. The unloading equipment does not necessarily have to be able to lift the entire guard all at once. It’s safer to lower one end to the ground so the rig does not come unstable and endanger anyone on the ground.
We hope this brief overview is helpful and if you have any questions at all, please let us know.
For more information on cattle guards, please call (720) 238-2190, email Sales@BarnWorld.com. or visit www.BarnWorld.com today!
There is a large variety of livestock equipment and cattle guards at Barn World and now we have cattle guards for ATV’s. When you’re out between pastures or along the fence line, nothing is more convenient that an ATV cattle guard.
Designed for easy installation, there’s no hole to dig, just cut your fence and lay the cattle guard on the ground. It’s that easy. The gentle rise in the texas gate is easy for a 4-wheeler to cross but keeps your livestock in. This is an easy and convenient piece of livestock equipment to install and use.
Cattle Guard for ATV
1- 1/2″ x 11 ga tubing square
14″ tall ramp
91″ long and 72″ wide
The width including the attached wings is 87″
Grey enamel finish
We have also customized these guards for use with rural golf carts and courses and it can be modified to accommodate almost any vehicle you need to cross a fence line.
Cattle Guards for ATV
Call Barn World today for more information or a shipping quote on this unique cattle guard and don’t forget that Barn World has a large selection of cattle guards for highways, construction use and private drives for you to choose from.
Barn World – more than just farm and ranch supplies and livestock equipment!
There are many types of Cattle Guards and several different methods of installing them that are dictated by traffic type and site conditions. Making sure your installation is appropriate for both will ensure a long lasting installation for years to come.
Below are a few of the more common methods and if you have any site-specific concerns, please contact Barn World and we’ll be happy to help.
Traditional Foundation Installation
Flat Cattle Guard Installation
Flat Top Rail Cattle Guard Installation and Foundation Requirements
Proper installation of a flat top rail cattle guard requires a sturdy foundation, including footings and a concrete vault. A permanent setup involves constructing a reinforced vault with 6-inch thick concrete walls around the perimeter. These walls serve a crucial role in keeping soil and debris from filling the area beneath the cattle guard, ensuring a clear and functional barrier for livestock containment. Additionally, strategically placed footings help distribute the weight of vehicles crossing the guard, preventing structural stress and premature wear.
Concrete Footers for Structural Support
Within the vault, concrete footers are poured to provide a stable resting surface for the support beams of the cattle guard. While specific requirements depend on local soil conditions, industry standards recommend that these footers be at least 12 inches wide and 18 inches deep. The footers must be positioned precisely beneath the support beams to properly distribute the weight of crossing vehicles, ensuring long-term durability. Consult a qualified contractor to assess your soil composition and determine the necessary reinforcements for your installation.
Optimal Vault Depth and Drainage Considerations
The recommended depth of the completed vault is approximately one foot. If the vault is too deep, livestock that attempt to cross may risk injury from falls. Since every cattle guard installation is unique, factors such as local soil composition and drainage conditions must be carefully considered. To facilitate natural drainage, most installations utilize crushed rock and porous soil at the base of the vault, creating a natural French drain effect. However, if the installation site has poor drainage, a PVC pipe system can be installed to channel excess water away and prevent water accumulation beneath the cattle guard.
Flat Rail Cattle Guards for Water Crossings
When installed correctly on a concrete foundation, flat top cattle guards can be placed over small streams or creeks, functioning similarly to a bridge. A culvert is often installed beneath the road surface, allowing water to pass through while maintaining structural integrity. The concrete footers are poured beneath the beams, embedding the culvert securely. A 6-inch thick retaining wall is then formed around the vault to prevent soil erosion and ensure stability. As traffic crosses the cattle guard, the load is transferred from the steel rails to the C-channel support beams, which then distribute the weight evenly onto the footers.
By following these essential installation steps, a flat top rail cattle guard can provide a durable, low-maintenance livestock barrier that supports both heavy traffic and effective containment. Whether used on ranches, farms, or commercial properties, proper foundation planning is key to ensuring longevity and optimal performance.
Boxed Cattle Guard Installation
Boxed Cattle Guard Installation and Best Use Cases
The most straightforward cattle guard installation method utilizes a boxed cattle guard. Unlike traditional flat rail designs, these guards are designed to sit directly on the ground without requiring footings or a concrete vault. The welded steel box attached to the guard serves a single purpose—to prevent soil from filling in underneath, maintaining a clear barrier for livestock containment.
Surface Preparation and Installation Considerations
For optimal performance, the installation surface should be as level as possible. This minimizes movement and ensures a stable crossing for vehicles and equipment. While boxed cattle guards do not require permanent anchoring, they may be temporarily secured to prevent shifting, especially in high-traffic areas. They perform best on firm, compacted soil, where they can be set in place and covered with dirt ramps on either side to create a smooth transition for crossing vehicles.
Enhanced Stability with Railroad Ties
One effective method to improve long-term stability and prevent sinking is placing the cattle guard on a set of railroad ties. This approach helps distribute the weight of passing vehicles, reducing pressure on soft ground. If there is concern about slippage, especially on sloped surfaces, the cattle guard can be securely bolted to the railroad ties for additional reinforcement.
Best Applications for Boxed Cattle Guards
Boxed cattle guards are commonly used in temporary or semi-permanent installations where ease of relocation is a priority. Some of the most popular applications include:
Construction sites – Keeping livestock out of active work zones
Oil and gas drilling sites – Preventing livestock intrusion
Truck wash stations – Preventing debris from being tracked onto public roads
Maintenance and Relocation
Since boxed cattle guards are fully portable, maintenance is simple. Over time, debris may accumulate underneath, reducing their effectiveness. To clean, the guard can be dragged a short distance, allowing dirt and debris to be cleared before repositioning it back in place.
Strength and Durability
A boxed cattle guard provides the same level of strength and durability as a permanent flat rail cattle guard. However, its key advantage is its ability to be moved from one job site to another without the need for excavation or concrete work. This makes it an ideal solution for businesses and landowners needing a reliable yet flexible livestock barrier.
For those seeking a temporary yet highly effective cattle guard solution, boxed cattle guards offer a practical, durable, and easy-to-install option suited for a variety of commercial and agricultural applications.
Removeable cattle guard
There is also a handy option for the integral box design called the removable box option. In this unique setup, the steel skirt is a standalone box and the cattle guard may be removed from it without disturbing the surrounding installation site. This is very useful for cleaning out debris in the vault beneath the cattle guard without having to reinstall the guard itself.
The box does not provide structural support or carry any weight, it is merely there to keep dirt from filling in below the category. The flexibility to remove the guard itself is the purpose of the design.
For more information on cattle guards, please call (720) 238-2190 or visit Barn World online at www.BarnWorld.com.
Barn World now carries a ‘basic class’ of cattle guard for private farm and ranch use. They provide the same strength and longevity as an American Association of State Highway Transportation Officials (AASHTO) rated guard, but without the cost.
The basic class was designed with the private drive and rancher in mind. Allowing for easy access to your property while eliminating the need for gates, these cattle guards give open access to your land and keep the livestock where they belong. It’s built from heavy duty structural .188 (3/16″) walled pipe with a diameter of 3.5″ or 4.5″ depending on availability or request. Note that the walls of the basic guards are thicker then schedule 40 ensuring years of durability and strength.
These cattle grids or are capped on the end to prevent any rusting and are also offered with wings, flat or boxed if so desired. There is no difference in strength between the boxed cattle guard and the flat cattle guards.
All of our cattle guards weigh about 100 lbs. per foot (a 10′ cattle guard weighs about 1,000 Lbs.) and when boxed, add approximately 8 lbs. per foot for boxed cattle guards. Cattle guard wings add approximately 200 lbs. total.
For use with deer, it will be necessary to increase the distance in the direction of travel. Deer are terrific jumpers and will be able to leap an 8′ cattle guard without any trouble. In that case, you may need to place two cattle guards in tandem so you have 16 feet of protection. Cattle guards are easily bolted together and can provide an effective deterrent for deer.
If you have any questions about cattle guards, please call (720) 238-2190 or visit us at BarnWorld.com. Please consider Barn World for all your livestock equipment needs.
