Barn World carries a large selection of mineral feeders for all of your livestock. Make sure your animals remain healthy with mineral feeders from Barn World
| ||
 |
| |||||
|
| |||||
| ||||||
|
| |||||
|
| |||||
|
| |||||
Radiant Floor Heating from Barn World with the Crete-Heat Floor Panel System
The easy use and install Electric Boilers for Radiant Floor Heating is designed to be used with PEX Tubing and the Crete Heat Insulated Floor Panels. This system is designed specifically for installation in poured concrete basement and garage slabs that are well insulated below and around the outside edge of the slab. Use these hydronic heating kits to heat up to 900 or 1000-1800 square feet of single-zone basement, garage, greenhouse, or home addition. Radiant-Made-Simple Radiant Heat Systems provide an energy-efficient (approaching 99%) solution for concrete floor heating.
CHOOSE YOUR RMS MODEL ACCORDING TO THE SPACE YOU WISH TO HEAT IN YOUR BASEMENT OR GARAGE, AND YOUR ELECTRICAL REQUIREMENTS
| Square Feet | RMS Model | Loops | BTU/h |
| 350 to 600 | RMS-7 | 2 | 23890 |
| 610 to 900 | RMS-7 | 2 | 23890 |
| 910 to 1200 | RMS-11 | 3 | 37540 |
| 1210 to 1500 | RMS-11 | 4 | 37540 |
| 1510 to 1800 | RMS-11 | 5 | 37540 |
ELECTRIC SERVICE REQUIREMENTS | |||
| MODEL | AC VOLTAGE | HEATER AMPS | BREAKER |
| RMS-7 | 220/240 | 29 | 40 AMPS |
| RMS-11 | 220/240 | 46 | 60 AMPS |
HAVE AN AREA LARGER THAN 1,800 SQUARE FEET?
Areas larger than 1800 square feet should be subdivided and served with two or more RMS units sized for each area.
EXAMPLE #1: A 2500 square foot basement could be treated as two, 1,250 square foot areas each served by one RMS-11 boiler having 4 loops each.
EXAMPLE #2: Two temperature zones are desired in the 2,500 square foot basement, one 760 square foot zone could be served by one RMS-7 boiler with 2 – 300 foot loops, and the remaining 1,760 square foot area served by one RMS-11 heater with 5 – 300 foot loops. (Thermal isolation is required)
PEX Oxygen barrier tubing installs with Radiant Heat system on 2” insulation foam board. This Radiant Made Simple Radiant Floor Tubing Kit works with Radiant Made Simple Radiant Heat systems. Requires .92 gallons of RV antifreeze per 100 feet of tubing. 300′ X 1/2″ PEX Oxygen barrier tubing installs with Radiant Heat system on insulating foam board. Tube bends help make the transition from tubing in concrete to the manifolds. Allow 1 linear foot of tubing for 1 square foot of space to be heated. Order 1 each 300’ Loop Kit per 300 square feet of space to be heated.
Ready For Concrete
The Crete-Heat Insulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier, and radiant tube holding grid that allows for easy installation of hydronic radiant floor heating systems in basements, garages, main floor slabs on grade and above grade installations where concrete or Gyp-Crete is normally used. For basements, a ‘light weight’ concrete (sand instead of pea gravel) may be used in 1-1/2″ thickness. Uses 1/2″ tubing. Total thickness is 1-7/8″. This Product is sold by the bag, each containing 12 panels and covering 96 square feet. To determine your total square footage, divide your total square footage by 96 for the number of bags needed.
Each panel board size is 25″ x 49″ with an effective insulating area of 24″ x 48″. Each interlocking panel covers up to 8 square feet with knobs to accommodate 3/8″ up to 1″ sized PEX. A 10-mil polystyrene film provides the vapor barrier.
They have multiple manifolds for controlling individual zones and are a simple and efficient means of providing warmth throughout the slab.
Calf warmers provide essential protection from the elements when your calf is most vulnerable. Mother Nature doesn’t care that it’s calf season and subjects your newborns to the harshness of winter right after birth.
Now is the time to buy a calf warmer to protect them and help them make a quick recovery right after experiencing birth into their brave new world. Make sure you’re ready to protect them and that your young ones can recover from the birthing process out in the cold pasture.
Our calf warmers offer the best possible care for a newborn calf. They’re made of long-lasting polyethylene for durability and easy cleaning and create the perfect closed environment for a newborn during those first critical hours after birth.
The heater is located in a separate enclosure at the rear of the calf warmer and uses a circulating fan and automatic shutoff thermostat to regulate the airflow and keep vulnerable newborn calves warm. The inside has enough room so the animals can either stand or lie down during recovery. The calf’s instinctive identity scent is not removed, so waiting mothers will reclaim their rejuvenated infants at once.
You can also buy the heater separately if a replacement is necessary. It is the heart of the warmer and needs to be functioning properly to protect your animal. Make sure yours is in good working order or get an extra one to have on hand in case you need a replacement quickly. You don’t want to end up trying to keep your newborns warm in the cab of your truck!
Now is also the time to think about getting prepared with a calving pen or maternity pen. There are two types of pens to help you sort calves from difficult heifers. All sides of the square calving pens have an in-and-out swing gate and latch for easy access from any direction. The circular maternity pen has a confinement area that includes nursing panels on two sides. You can get an optional self-catching head-gate with either model to hold them safely.
Be ready for calving season and the supplies and equipment you need ahead of the season. Call BarnWorld.com for quotes that include shipping directly to your ranch at 720-238-2190.
Barn World Post: Livestock Waterers
Livestock waterers are important for keeping your animals for health and weight gain. Barn World has a wide selection oflivestock waters for all you animal waterer needs.
The large 60 gallon Big Spring Waterer is a constant-flow watering system ideally suited for free-stall dairy operations and large feedlots. If you raise beef or dairy cows, the BIGspring model is perfect to fit your needs.
Smaller waterers in the Lil Spring waterer models are ideal for small animals or groups of small animals — such as goats, llamas, ponies, horses, and many others. Lil’Spring models can accomodate multiple pens by installing them in a split-fence application. We offer them as single or double sided waterer.
Our Energy-Free Waterers:
E-Founts are the most economical electric heat waterers available today. The E-Fount is equipped with a 50 watt heat element and thermostat. E-Founts only require 4 kilowatts of electricity during a week of -25 degree F temperatures. This model is ideally suited to operations with just a few animals drinking infrequently or if extreme cold weather conditions are persistent.
We also offer the MiraFount models which are patterned after their first energy-free livestock watering systems, built more than 30 years ago. These small. medium and large capacity watering systems are ideal for beef operations, dairy herds and other livestock.
We also have utility Hog Waterers in 80 and 35 gallon sizes. The hog waterer is:
Remember to keep your animals healthy with a animal waterer from Barn World. Visit BarnWorld.com for all your livestock equipment needs.
Now is the time to buy a calf warmer, calving pen, and maternity pen. This has been a brutally cold winter all across the country. Calves are being born now. Make sure you are ready with a calf warmer in proper working condition.
Our calf warmers offer the best possible care for a newborn calf. BarnWorld.com sells calf warmers made of long-lasting polyethylene for durability and easy cleaning. The calf warmer creates the perfect closed environment for a newborn during those first critical hours after birth. The heater, located in a separate enclosure at the rear of the calf warmer, uses a circulating fan and automatic shutoff thermostat to regulate air flow and keep vulnerable newborn calves warm. The inside of the calf warmer has enough room so the calf can either stand or lie down. The calf’s instinctive identity scent is not removed, so waiting mothers will reclaim their rejuvenated infants at once.
BarnWorld.com also offers replacement heaters for calf warmers. Make sure yours is in good working order or get one of our replacements before you need it. Don’t end up with your calves in the cab of your truck to keep warm.
Now is also the time to think about getting a calving pen or maternity pen. BarnWorld.com carries two types of calving pens to help you save calves from difficult heifers. All sides of the square calving pen have an in-and-out swing gate and latch for easy access from any direction. The circular maternity pen has a confinement pen and nursing panels on two sides. You can get an optional self-catching headgate with either model.
Be ready for calving season. Order your calf warmers, calf warmer heaters, and calving pens now. Call BarnWorld.com for shipping quotes at 720-238-2190.
Radiant Floor Heat with Crete-Heat Floor Panels and DIY Heaters
Installing a radiant heating system in a new slab doesn’t have to be complicated or expensive. These systems provide very economical and efficient heat to large areas in a quiet and cost-effective manner.
PRICE REDUCED !! – You simply cannot afford to install radiant floor heating without this product!
You certainly cannot afford the energy lost into the ground!
These 2′ x 4′ panels are available in 1″, 2″ and 3″ thickness for varying R-values. Each panel has a vapor barrier and the edges overlap to interlock together for ease of installation. The overlaps also minimize movement when installing the PEX and pouring the concrete.
The knobs on each panel hold the PEX securely in place and allow you to walk directly on them to push the PEX into place. They add approximately 7/8″ of an inch to the listed panel thickness. As and example, the 2″ panels offer 2″ of insulating thickness and the knobs add another 7/8″ on top of that for an overall thickness of 2-7/8″.
CHOOSE YOUR RMS MODEL ACCORDING TO THE SPACE YOU WISH TO HEAT IN YOUR BASEMENT OR GARAGE, AND YOUR ELECTRICAL REQUIREMENTS
| Square Feet | RMS Model | Loops | BTU/h |
| 350 to 600 | RMS-7 | 2 | 23890 |
| 610 to 900 | RMS-7 | 2 | 23890 |
| 910 to 1200 | RMS-11 | 3 | 37540 |
| 1210 to 1500 | RMS-11 | 4 | 37540 |
| 1510 to 1800 | RMS-11 | 5 | 37540 |
ELECTRIC SERVICE REQUIREMENTS | |||
| MODEL | AC VOLTAGE | HEATER AMPS | BREAKER |
| RMS-7 | 220/240 | 29 | 40 AMPS |
| RMS-11 | 220/240 | 46 | 60 AMPS |
HAVE AREAS LARGER THAN 1800 SQUARE FEET? NO PROBLEM
Areas larger than 1800 square feet should be subdivided and served with two or more RMS units sized for each area.
EXAMPLE #1: A 2500 square foot basement could be treated as two 1250 square foot areas each served by one RMS11 having 4 loops each.
EXAMPLE #2: Two temperature zones are desired in the 2500 square foot basement, one 760 square foot zone could be served by one RMS7 with 2 300 foot loops, and the remaining 1760 square foot area served by one RMS11 with 5 300 foot loops. (Thermal isolation is required)
PEX Oxygen barrier tubing installs with Radiant Heat system on 2” insulation foam board. This Radiant Made Simple Radiant Floor Tubing Kit works with Radiant Made Simple Radiant Heat systems. Requires .92 gallons of RV antifreeze per 100 feet of tubing. 300′ X 1/2″ PEX Oxygen barrier tubing installs with Radiant Heat system on insulating foam board. Tube bends help make the transition from tubing in concrete to the manifolds. Allow 1 linear foot of tubing for 1 square foot of space to be heated. Order a 300’ Loop Kit per 300 square feet of space to be heated.
Ready For Concrete
The Crete-HeatTM Insulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier, and radiant tube holding grid that allows for simplified installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete is normally used. For basements, a ‘light weight’ concrete (sand instead of pea gravel) may be used in 1-1/2″ thickness. Uses 1/2″ tubing. Total thickness is 1-7/8″
This Product is SOLD BY THE BAG – 12 PIECES PER BAG
The 1″ thick panels ship in a black bag and each bag covers 96 Sq Ft. To determine the number of bags needed, divide your total square footage by 96 and round up to the next whole number.
Ready For Concrete
The Crete-Heat Insulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier, and radiant tube holding grid that allows for simplified installation of hydronic radiant floor heating systems in basements, and garages, main floor slab on grade and above grade installations where concrete or gypcrete is normally used. The Crete-Heat Insulated Floor Panel System is 2 7/8″ overall in thickness, with 2″ of solid EPS foam providing an R-10. The panel board size is 25″ x 49″ and the effective area is 24″ x 48″.
Our retrofit of over grade panel provides 2 1/8″ overall in thickness, with 1″ of solid EPS foam providing and R-6 with a 23 dB sound reduction knob on the lower surface. Each interlocking panel covers up to 8 square feet with fasteners for 1/2″ and 5/8″ radiant tubing. A 10-mil polystyrene film provides the vapor barrier.
This Product is SOLD BY THE BAG – 8 PIECES PER BAG
EACH 2″ Green Bag covers 64 Sq Ft. Determine your total square footage and divide by 64 for the total BAGS needed.
These Electric Boilers provide an energy-efficient, Do-It-Yourself solution, for heating a single zone: basements, garages, home additions, greenhouse or remodeling projects. Energy efficiency approaches 99%!
| RMS-7 – Radiant Made Simple Radiant Heat System – 7 kW, 23,890 BTU Electric Heater, 240 Volts A/C, 40 Amp. | |
| Radiant Made Simple Radiant Heat Systems provides an energy-efficient, Do-It-Yourself solution, for heating a single zone: basements, garages, home additions, greenhouse or remodeling projects. This 230V, 40 Amp product provides everything you need to install radiant floor heating. Efficiency approaches 99%. | |
For help or a quote with shipping to your address, please contact Barn World today!
Barn World Customer Service – (720) 238-2190 – Sales@BarnWorld.com
There are many different choices when selecting a cattle guard for your livestock containment needs. They may be called by various names (Texas gates, animal guards, cattle grids, cow guards etc.) but they all are built around the same great idea: provide a visual deterrent coupled with a physical barrier to keep livestock from crossing. This provides containment for your herd while allowing vehicle crossings without a gate!
The rated cattle guards are designed for highway use and certified to meet the specifications needed for State and Federal requirements such as DOT installations. They’re design and construction is certified by an engineer to meet the required load ratings.
They’re available in flat top rail designs in a powder-coated finish as well as the more economical round top rail design that’s coated in a tough enamel. They will provide years of rugged service in heavy-duty high traffic public areas.
These are also available for private driveways such as farms and ranch applications. This design in much more economical and we estimate the load-carry capacity at 12 tons per axle. That’s plenty for most driveway use and easily support fully-loaded semis. We call them ‘Standard Cattle Guards.’
Barn World’s private-use, economical choice of the standard guard is a very popular option for driveways. They are made with NEW 3″ Schedule 40 steel with the same construction technique used on the rated guards.
All of the round top rail designs may be ordered with optional wings, integral box, or removable box.
are unique in the industry. They’re built for quick and easy installation and attach directly to your fence line without the need for a foundation. We recommend providing sufficient drainage to the area and keeping it clear of overgrowth from surrounding vegetation. Other than that, simply set in your fence line, attach the fencing to the uprights and you’re done!
All cattle guards may be fitted with plow strips that allow plows to cross over the guard with minimal interference and wear.
All round top rail designs may be outfitted with a removable box for easier cleaning as an option.
They may also have a steel skirt welded to the perimeter which allows it to be placed directly on the ground without the need for a foundation.
Barn World has a cattle guard to meet your needs. Please call us (720) 238-2190 with your questions and to obtain shipping quotes. We can also provide professional bid packages for large company, military, and government programs and carry a large selection for all of your livestock equipment needs.
Barn World features a large selection of livestock vacuums and blowers and even industrial vacuums. All of your animal blower and animal vacuum need can be met at www.BarnWorld.com.
Industrial Vacuums
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||
Use these great rubber mats for all kinds of uses
Barn World now carries stall mats and horse trailer mats.
Horse Stall Mats
The horse stall mats are long lasting, easy cleaning, non-absorbent and slip-resistant. They promote equine health and can save a tremendous amount in bedding costs. They’re easy to install and will fit standard stall sizes.
Barn World also offers custom cut mats and interlocking mat kits of 10’x10′, 10’x12′ and 12’x12′, pre-cut, interlocking and ready to go!
They are covered by a generous 15 year manufacturer’s warranty.
Some of the great features of these stall mats include:
This is the thickest, toughest and most economical stall mat you can buy!
SureHoof Horse Trailer Mats – Long Lasting, Easy to Clean, Non-Absorbent, Protects both Horse & Trailer.
Provides Sure Footing on Ramp & Floor. Versatile, durable rubber mats that can be used anywhere.
No wonder it’s the choice of leading trailer manufacturers!
This trailer mat is also protected and guaranteed with a 15 year manufacturer’s warranty!!
Hoof care the easy & comfortable way! Easy on the horse and the user, the Hoof-it® Stand gives you both the post and cradle integrated into one, innovative hoof stand. Do yourself a favor! Take the pain out of your back and knees with the New Hoof Stand from HOOF-it® Technologies
The HOOF-it® ‘All in One’ Hoof Stand, designed by Farrier Steve Samet, features a shock absorbing, integrated rubber cradle and hoof post into one easy to use unit.
The Hoof Stand provides a stable and safe support for the horse, allowing it to relax without putting all of it’s weight on you.
For additional safety and stability when working with the Hoof-it®Stand try the following:
* keep on foot on the base unit when working with the Hoof® Stand
* do not leave the horses leg or hoof in the cradle or on the stand, when unattended.
Benefits for Farrier’s, Veterinarians and horse Owners who use the HOOF-it® Hoof Stand:
√ Easy to use “All in One” innovative, design integrates both the post and cradle in to one.
√ The innovative design of the HOOF-it® Hoof Stand dramatically reduces your risk of getting injured during hoof care tasks.
√ The HOOF-it Stand is ideally suited for use with all types of horses, including older horses that require special support and comfort during hoof care tasks.
√ The rubber cushioned Cradle fits different hoof sizes and hugs the hoof.
Let HOOF-it® Hoof Stand deal with the majority of the horses weight during any type of hoof care tasks, rather than your back or knees.
Visit www.BarnWorld.com today to see all of Barn World’s farrier supplies and livestock supplies.
