Flat Feed Trough Liner for Economy Feed Bunk - 10'

Roll over image to zoom in Click on image to zoom

Feed Trough Liner

Why replace a complete bunk feeder when you can just swap out the liner?

The liners ship flat and are curved into shape by the feeder. They have no pre-drilled holes.

This poly liner will never rust and is a replacement liner for the 10' feed bunk. It is pre-cut for this specific trough feeder frame only and is not meant to fit other brands of feeders.

Order these poly feed troughs in groups of three or more to save on the shipping cost and maximize your profits!

Specifications

Approximately .100" thick - almost 1/8"
Measures approximately 33" x 119.5"
No pre-drilled holes
Ships Flat - gets its shape from the feeder frame
Available in a 5' length here

Do you have this poly feed trough liner in a pre-formed tub shape?

We do carry a 10' pre-formed poly trough liner and you may see all of our poly trough bunk feeders here.

I need a 11 ft long and 30 3/4 wide are they available?

We do carry an 11 ft replacement liner (click here)however it's 33" and would have to be cut down to your 30-3/4" measurement.

Are there ends included on the liner to keep feed from spilling?

This replacement liner is a flat sheet of plastic and is not pre-formed. It is held in a curved shape by the frame and it is the frame that has the ends.

Will these curve into shape with out the metal frame? I want to use them as grow beds for an aquaponics system.

No, they aren't curved, you will need some type of frame to give the liner its shape. It's a flat section of plastic that gets its shape from the metal frame and won't hold water on the ends. For

Call Or Email

sales@barnworld.com

(720) 238-2190

Flat Feed Trough Liner for Economy Feed Bunk - 10'