|
| Horse Round Bale Feeder |
| 1" 16ga square tubing rings
1" 16ga round tubing stanchions - 24"
25" steel skirt is made of 20ga steel
6'6" in diameter
49" tall
Especially for horses and longhorn cattle
Bolt together in three sections
Green enamel finish
Weighs 225 lbs, easy to flip over hay
Outside diameter 7'6" |
| |
| Item no. RBF-H |
| Today$239.00 |
|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
| All round bale feeders designed and built with high quality steel and built to last.
|
|
| The Q&A on this Product |
|
|
| QUESTION: Hi Robert,
I talked to you from Friday Harbor WA the other day and you quoted me shipping for the RBF-H. Several other questions: Is unit powder coated? What is the rim like on the 25" skirt, is there a rolled top? Who is the manufacturer? |
| ANSWER: The feeder is finished in green enamel paint. The sheet metal is welded to the top of the tubing frame and there are no sharp corners on it. This feeder ships from Ft. Worth, TX. |
|
| QUESTION: How much would the shipping cost be for Item no. RBF-H,qty 1 to Cypress, TX 77429? |
| ANSWER: Thank you for your interest in the Horse Round Bale Feeder. This feeder is manufactured in Clebure, TX and is available for pick up. We would most likely be able to ship up to three for the same rate. The shipping for a single feeder to your address would be $179.89. |
|
| QUESTION: does it open up so you can roll a round bale in it |
| ANSWER: This feeder is bolted together. It weights approximately 225lbs. and can be tipped on it's side to load underneath, or the bale is lifted into it by tractor. |
|
| QUESTION: Do you sell to Canadian customers? What is the cost of shipping and time frame? I live in Cranbrook BC. |
| ANSWER: We do ship to Canada. Please forward your postal code and if you have a broker for customs or if you would like us to provide one for you. |
|
| QUESTION: Where can this feeder be picked up at. Dealer location to save shipping costs / |
| ANSWER: This feeder can be picked up near Ft. Worth, Texas. |
|
| QUESTION: This also looks like a good possibility for highland cattle. |
| ANSWER: This one will work well for long horn cattle.
|
|
| QUESTION: Do the sections BOLT together? Is there a SIMPLE way [such as inserting locking pins into slots]to open feeder to allow round bale to be put into feeder and then reclosed?
|
| ANSWER: Yes the sections bolt together - it is very easy to assemble and to flip over a bale. |
|
| QUESTION: Does this one have a floor? If not can one be built for it? |
| ANSWER: No this one does not. We probably would not be able to put a floor in
it because of shipping reasons. |
|
| QUESTION: Can this possible be used for rectangular bales? We like the nature friendly color and the simplicity of this one. Item # SH83HF meets our needs for rectangular bales but is YELLOW (not nature friendly color) and seems less simple. |
| ANSWER: I do not see any reason that you could not put rectangular bales in it.
Thanks |
|
| QUESTION: what is the diameter |
| ANSWER: The diameter is 6' 6" |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
powered by WordPress e-commerce company
