Event Photos
HOME VIEWCART CHECKOUT CONTACT
BarnWorld.com BarnWorld.com BarnWorld.com
Instant Barns, Garages & Greenhouses
Cattle Guards
Hay Feeders
Hay Feeder Accessories
Mineral Feeders
Grain Feeders and Troughs
Hog Feeders
Stock Tanks
Waterers
Continuous Fence
Electric Fence
Gates & Panels
Gate Openers
Wrangler Horse Stalls
Evaporative Coolers & Fans
Stable Equipment
Tack and Blanket Racks
Saddle Pads and Cinchas
Equine Boots
Farrier Supplies
Grooming Products
Industrial Dry Vac & Blowers
Creep Feeders and Cages
Bulk Feed Bins
Livestock Scales
Chutes and Alleys
Natural Insecticide
Bird Damage Control
Insecticides & Fly Traps
Poultry & Supplies
Natural Feed
Health Products
Outerwear
Barn/Building Insulation
Calf Warmers
Calving Pens
Rabbit Equipment
Beekeeping Supplies
Stuffed Horses, Foals and Donkeys
Canopies
Radiant Floor Heating
Weather Vanes
Hoop, Gable, &Truss Arch Buildings
Ultimate Spur
WordPress BLOG

Secure online credit card processing

Muck Boot Company

Cattle Guards

Our cattle guards allow easy access to farm and ranch land by eliminating the need for gates. Cattle guards give open access but keep livestock inside. All cattle guards are constructed with heavy wall steel pipe and extra thick steel channel. All ends of these cattle guards are capped to prevent rust. Wings and boxed cattle guards are available with all sizes. All cattle guards come standard with a gray enamel finish.

Size of cattle guards

10' cattle guard
12' cattle guard
14' cattle guard
16' cattle guard
cattle guards with wings
boxed cattle guards

Stock No.

CG-10
CG-12
CG-14
CG-16
CGW - Size
CG-Size-B

  		• Boxed style cattle guards are designed to sit on flat ground. Gravel underlayment is recommended for drainage of these cattle guards. In many cases these boxed cattle guards are used for wheel washes in construction sites.
  		• Flat style cattle guards are designed to be placed into a hole/foundation with a cement form.
  		• All cattle guards can withstand the weight of full tractor-trailer loads.
  		• These cattle guards are constructed using either 9 pieces of 4-1/2" pipe with an approximate gap of 4" between each pipe.
  		• All cattle guards made with 4-1/2" pipe are 6 feet wide by 12-1/2" tall.
  		• There is no difference in strength between the boxed cattle guard and the flat styles of cattle guards.
  		• All cattle guards weigh about 100 Lbs. per foot (a 10' cattle guard weighs about 1,000 Lbs.). Add approximately 8 Lbs. per foot for boxed cattle guards and about another 200 Lbs. total for winged cattle guards.
  		• To use for deer, you may need to place two cattle guards in tandem so you have 12 feet of protection instead of 6 feet. Cattle guards are easily bolted together.
  		• We can custom build a single 12 foot width cattle guard, but shipping for this single cattle guard is very expensive (overwidth). It is far more economical to bolt two 6 foot wide cattle guards together.
  		• Customers have reported success in keeping deer out with a single, 6 foot wide cattle guard.
  		• For a shipping quote, please go to the page of the cattle guard you want, and use the Q&A section to enter in your destination zip code and quantity. We will email the shipping quote to the email address you provide. Or feel free to call the telephone number at the bottom of this page for a shipping quote or any other questions you ay have about our cattle guards.
  		• When ordering cattle guards you will pay for the order without the shipping and we will collect the exact shipping cost with a second charge to the credit card used for the order.
  		•  Note: You must have equipment available to unload the cattle guards from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
  		• Note with regard to dimensions: Cattle guards are NOT built to exact dimensions. Sizes may vary by as much as several inches. Adding the removable box option will add about 7" to the total length and width of the cattle guard. For example, a 12 foot cattle guard will be about 12'-7".
    New! Cattle Guards with a Removable Box
    Cattle Guards with a Removable Box
  • Available as an option on ALL the flat cattle guards listed below.
  • Click here for a larger picture of this cattle guard
    • 10 Foot Cattle Guard - Standard Flat  Item #: CG-10  $935.00

    Options for this cattle guard include wings and removable box for easy clean-out.
    10 foot Cattle Guard with Integral Box  Item #: CG-10-B  $1,080.00

  • This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 10 Foot Cattle Guard - Standard Flat and add the Removable Box option.

    • 12 Foot Cattle Guard - Standard Flat  Item #: CG-12  $1,075.00

    Options include wings and removable box for easy clean-out.
    12 foot Cattle Guard with Integral Box  Item #: CG-12B  $1,205.00

  • This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 12 Foot Flat Cattle Guard and add the Removable Box option on that page.

    		•
    14 Foot Cattle Guard - Standard Flat  Item #: CG-14  $1,250.00

    Options include wings and removable box for easy clean-out.
    14 foot Cattle Guard with Integral Box  Item #: CG-14B  $1,398.00



  • This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 14 Foot Flat Cattle Guard and add the Removeable Box option on that page.

    		•
    16 Foot Cattle Guard - Standard Flat  Item #: CG-16  $1,435.00

    Options include wings and removable box for easy clean-out.
    16 Foot Cattle Guard with Integral Box  Item #: CG-16B  $1,590.00



  • This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 16 Foot Flat Cattle Guard and add the Removeable Box option on that page.

  • Dimensions: 16` X 6` X 12.5"
  • Made with 8" channel
  • Designed to withstand the loads of full tractor trailers

    		•
    20 Foot Cattle Guard - Standard Flat  Item #: CG-20  $2,290.00

    Options include wings and removable box for easy clean-out.
    20 Foot Cattle Guard with Integral Box  Item #: CG-20-B  $2,450.00



  • This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 20 Foot Flat Cattle Guard and add the Removeable Box option.

    		•
    ATV Cattle Guard  Item #: CG-ATV  $599.00

    Made for easy installation. No need to dig a hole - simply cut your fence and lay the cattle guard on the ground. Specifications:

  • 1 1/2 x 11 ga square tubing
  • 72" wide X 91" long
  • Ramp is 14" tall
  • Overall width of the guard including the wings is 87"
  • Comes standard with a grey enamel finish

    • Email questions to: Sales6@BarnWorld.com  
    Phone support: 720 238-2190
    Phone hours: Monday through Friday: 9:00 am to 6:00 pm (Mountain Time)
    Para toda la gente que habla español: Llámenos o mándenos un email. Se habla español.
    VISA image icon MasterCard image icon American Express image icon Discover image icon money order image icon personal check image icon wire transfer image icon
    SITEMAP     |     Webmasters: Earn Cash with our Affiliate Program!

    OrderStorm.compowered by
    © 2002-2009 BarnWorld.com. All Rights Reserved.
    Designated trademarks and brands are the property of their respective owners.
    Use of this Web site constitutes acceptance of the 1Tail.com Terms and Privacy Policy.