Stall & Portable Feeders

• 36"T x 24"x24"W
• Constructed of 16ga steel
• Requires holes be drilled for mounting
• 3/8 solid rod hayrack
• Gray enamel finish

• Gray enamel finish
• 3/8 solid rod hay racck
• 1/8 x 1 flat bar frame
• black enamel finish
• 33" tall and 36" wide

  A very economical way to feed

Creep Feeder II is an all new way to creep feed foals and calves. Made of high density plastic and stainless steel hardware it is made to withstand the mother's abuse. An adjustable sliding top lets the Creep Feeder II be adjusted as the baby grows.

A removable bottom makes for easy cleaning and removal of uneaten feed.

• top width 12-1/4"
• font to back 10-1/4"
• height 7-1/8"
• wall thickness 3/8"
• weight 5 lbs
• 3 yr warranty

See below for pictures

FREE SHIPPING TO THE LOWER 48 STATES!

Feed saver is a new approach too the problems horses having with their eating habits. The horses that sling feed out of feeders do so from the sides, not the front or back. We put sides on the feeders to prevent the feed spillage.

Made with 3/8 inch high density plastic with two machined plastic tops.

The Feed Saver has a removable bottom for easy cleaning. The removable bottom is also a big advantage of our feeders.

This feeder is tough and durable and are made to stand up against the most destructive horses.

• top width 12-1/4"
• front to back 10-1/4"
• height 7-1/8"
• wall thickness 3/8"
• weight 5 lbs
• 3 year warranty

MADE IN THE USA!

FREE SHIPPING TO THE LOWER 48 STATES!

• Can be hung low to the ground to encourage natural equine eating habits that improve your horse's respiratory system.
• The rounded edges of the Health EZ Hay Feeder are safety-oriented. No more rope burns!
• The oval openings are designed with the horse's muzzle in mind - smooth and just wide enough to fit the nose through.
• Easy to fill while still hanging on the wall of the stall or trailer.
• Handles allow the Health EZ Hay Feeder to be carried and hung most anywhere: in a stall, on a trailer, on the corral fence or paddock.
• Comes with 3/8" rope and snap for easy use and hanging.
• Slows down consumption time for better digestion, replicating Nature's way of slow grazing.
• Keeps your horse preoccupied with getting the hay out, resulting in less boredom.
• With openings on all sides, your horse can always reach the hay, no matter how he turns it.
• Stall cleaning is easier and faster with less hay to pick up and throw away. Less mixing of hay and bedding!
• The functional design catches smaller pieces of hay in the bottom instead of falling to the ground, resulting in less waste and loss.
• The Health EZ Hay Feeder is an ideal hay feeder for all your grazing animals, including goats, cattle and sheep

   

  Check out the great hay feeder videos below!!!

  FREE SHIPPING to the Lower 48 States!!!!

  THIS IS FOR 4 FEEDERS!

• One piece unit
• Can be hung on a paddock fence
• Holds 4 flakes
• No assembly required
• Heavy duty 1 in. x 16 ga. frame
• Polyethylene back and tub
• Weighs approximately 48 pounds
• No sharp edges

  Approximate dimensions

• Tub depth 10"
• Total width 31 1/2"
• Total height overall 41"
• Hayrack height 25"
• Hayrack width 31 1/2"
• Hayrack front to back at top 21"

• Rugged over sized capacity
• One piece construction
• Hold approximately 4 flakes of hay
• 22" Deep
• 18" top to wall surface

• Multi purpose hay and grain feeder
• Extra deep poly grain tub
• No sharp edges, Safe for horses
• 4 bolt mounting
• Weight 40 lbs.
• Height 38" without tub
• Depth of hay rack 24 1/2"
• Depth of hay rack (front and back) 22"

Poly Corner Mount Feeder

• 25 lbs
• Wrangle horse stall series
• 21" x 35"
• Bar spacing is 5 3/8" down to 1 1/4"
• no holes in bottom - you may easily make your own if needed

• Pivots to swing in and out of stall
• Locks in place.
• Multi purpose hay and grain feeder
• Extra deep poly grain tub
• No sharp edges, Safe for horses
• Weight 65 lbs.
• Height 38" without tub
• Depth of hay rack 24 1/2"
• Depth of hay rack (front and back) 22"

Poly Wall Mount Feeder

• 18lbs
• 23" x 28" x 18" deep
• 4 1/4" hay rack bar spacing
• Wrangle horse stall series

• Rugged over sized capacity
• One piece construction
• Hold approximately 4 flakes of hay
• 24" across top
• 15" top to wall surface
• Fully assembled

30"T x 17.5"Dx 2'W

• Constructed of 16ga steel
• Available with or without hooks
• 16ga hay rack
• Gray enamel finish

• Economical way to provide hay
• 3/8 solid rod hayrack
• 1/8 x 1 flat bar frame
• Black enamel finish
• 28" tall and 24" wide

  The bottom is approximately 4'' deep and and 24" wide and the top is approximately 6'' deep and 26" wide

This feeder is very difficult to ship economically in a single unit. If ordering a single feeder, we suggest it be arranged for a will-call order near Ft. Worth, TX