Poly Trough Feeders

• 1-1/2" round 16 gauge legs and runners
• 10" deep trough is rounded
• Approximately 20.5" tall
• Rounded bottom trough
• 24" wide at the top
• Leg width is approximately 29" from outside to outside
• Optional hayrack can be mounted on top
• Each leg is cross-braced for added strength
• High quality polyethylene line; won't rust, rot or corrode
• Weight 90lbs
• Fully assembled

  Replacement Liner available below

  Please note that HAY RACKS WILL NOT FIT THIS BUNK

• 1-1/2" round 16 gauge legs and runners
• 10" deep trough
• 24" wide at the top
• Leg width is approximately 29" from outside to outside
• Optional hayrack can be mounted on top
• Each leg is cross-braced for added strength
• High quality polyethylene line; won't rust, rot or corrode
• Weight 52 lbs
• Fully assembled

  Please note only HAY RACK 140055 WILL FIT THIS BUNK

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Formed so bunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10’ x 2’ feeder holds 1/2 ton of feed
• Width 26", Height 35.5"

Optional Hay Rack S189624BLK is designed to mount to this feeder

• 10' Poly Bottom Bunk Feeder
• Does not come with pre-drilled weep holes
• Weighs approximately 100lbs
• One piece assembly
• 20" high
• 10" deep
• 16 gauge steel

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Formed so bunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10’ x 2’ feeder holds 1/2 ton of feed
• Width 26", Height 23.5"

   

  Scroll down to see Optional Hay Rack S189624BLK that is designed to mount to this feeder

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Formed so bunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10' x 2' feeder holds 1/2 ton of feed
• Width 26", Height 16"
• 54 lbs

Optional Hay Rack S189624BLK is designed to mount to this feeder

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Trough is poly, approx 5' L x 12" deep and 18" wide
• FBunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10 x 2 feeder holds 1/2 ton of feed
• Width 26", Height 25.5"

SHOWN with OPTIONAL HAY RACK - not included

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Formed so bunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10’ x 2’ feeder holds 1/2 ton of feed
• Width 26", Height 35.5"

Pictured with OPTIONAL HAY RACK - NOT INCLUDED

• Heavy 16 gauge, 50,000 psi steel tubing
• Stands up to dairy, feedlot and pasture use
• Welded into one piece
• Formed so bunks can be set end-to-end or stacked for storage
• Rounded skid legs. 10’ x 2’ feeder holds 1/2 ton of feed
• Width 26", Height 16"

Pictured with OPTIONAL HAY RACK - NOT INCLUDED

5' Poly Bottom Bunk Feeder - 20" high

• Designed to fit bunks: 11' Horse (#100013) or 11' Sheep & Goat Bunk (#100012)
• Reduces hay waste
• No sharp edges
• 4 Bolt mounting
• Width at top of rack 25"
• Depth 27"
• 109 lbs
• Fully assembled

• Designed for Horse Bunk Feeder (#100052) and Sheep & Goat Bunk Feeder (#100051)
• 4 bolt mounting
• No sharp edges
• Reduces hay waste
• Solid one piece construction
• Approx weight 74 lbs

• Designed to fit 5' Bunk Feeder #101005 only
• Reduces hay waste
• No sharp edges
• 4 Bolt mounting
• Width at top of rack 25-1/2"
• Approx depth of rack 27 1/2"
• Approx weight 71 lbs.
• Fully assembled

Horse bunk approximate measurements

• 38 in. high
• 25 1/2 in. wide base
• 38 in. high
• 25 1/2 in. wide
• 39 in. base
• 8 1/2 in. deep trough
• Approx 140 lbs
• 1 1/2 in. 16 ga. round tube legs

  Pictured with OPTIONAL 11' hay rack (#140011)
  Select below if you'd like the hay rack with the bunk feeder

Horse bunk approximate measurements

• 38 in. high
• 25 1/2 in. wide base
• 39 in. base
• 8 1/2 in. deep trough
• Approx 75 lbs
• 1 1/2 in. 16 ga. round tube legs

  Pictured with OPTIONAL 5-1/2' hay rack (#140050)
  Select below if you'd like the hay rack with the bunk feeder

This is a replacement liner for the 10' feed bunk - product #101010 and is pre-cut for this specific trough feeder only.

The liners ship flat and are curved into shape by the feeder.

Approximately 33" x 119.5"

This is a replacement liner for the 5' feed bunk - product #101005 and is pre-cut for this specific trough feeder only.

The liners ship flat and are curved into shape by the feeder..

Approximately .100" thick

Measures 33" x 59 3/4"

This is a custom cust liner in a 12' length and is not designed to fit any specific trough.

Sheep bunk approximate measurements:

• 11' long
• 15 in. high
• 25 1/2 in. wide
• 33 in. base
• 8 1/2 in. deep trough
• 1 1/2 in. 16 ga. round tube legs
• Approx 103 lbs

  PICTURED WITH THE OPTIONAL HAY RACK
  Please select the optional hay rack below if desired

Sheep bunk approximate measurements:

• 5-1/2'' long
• 15 in. high
• 25 1/2 in. wide
• 33 in. base
• 8 1/2 in. deep trough
• 1 1/2 in. 16 ga. round tube legs
• Approx 60lbs

  Pictured with OPTIONAL 5-1/2' hay rack (#140050)
  Select below if you'd like the hay rack with the bunk feeder