Metal Trough Feeders

Used for hay, grain, mineral and silage. Line this panel bunk with our 12' or 6' slant bar feeder panel or 5 rail corral panel for pasture or fence line feeding. Strong and durable for your farm or feeding operation. Hemmed feeding zone for your animals safety with drain plug on each end for easy clean-out. 16 gauge x 2" skidded legs to keep bunk off the ground so they don't freeze down in water.

• The frame is 16 gauge hot rolled tubing with 1.66" x 16 gauge slant bars.
• The pan is 16 gauge hot rolled sheet
• 12' long x 34" wide x 60" high
• Pan 21.25" feeding height
• Weight is 374 LBS.

  Use with Slant Bar Feeder Panels:
  S186268BRN - 12' Panel with Kick Shield
  or
  S186334BRN - 6' Panel with Kick Shield

• This sturdy steel frame Feed Bunk is powder-coated to stand up to tough use.
• Bunk Feeder converts to hay feeder in minutes with Optional Hay Rack S15549.
• Dimensions: LxWxH 5'x 20" x 20"
• Weight: 60 pounds
• Color: Prarie Gold
• Has pre-drilled holes in end caps with plastic plugs
• Pictured with option hay rack S15549 - not included

• This sturdy steel frame Feed Bunk is powder-coated to stand up to tough use.
• Bunk Feeder converts to hay feeder in minutes with Optional Hay Rack S180773.
• Dimensions: 10' Long, 24" Wide, 26" High - Weight: 124 pounds
• Has pre-drilled holes in end caps with plastic plugs
• Pictured with optional hay rack S180773 - not included
• Color: Prarie Gold

• This sturdy steel frame bunk has an electro-galvanized metal hopper that stands up to tough use.
• Bunk Feeder converts to hay feeder in minutes with Optional Hay Rack.
• Dimensions: LxWxH 12'x 3'x 26
• Weight 162 lbs.
• Has pre-drilled holes in end caps with plastic plugs
• Feeder shown with optional hay rack S154884 - not included, please add below
• COLOR IS NOT GUARANTEED. These units may be painted in any of a variety of colors - the coating is for protection in storage only.

10' Bunk Feeder on Skids

• Trough is made of 14ga quality steel 8" deep - 34"W x 20" H
• Round corner 1-7/8" 16ga tubing for easy moving
• Gray enamel finish
• This item is LARGE and HEAVY. Please call for shipping estimate before ordering.

• Trough is made of 16ga quality steel 8" deep
• 34"W x 20" H
• Gray enamel finish

12' Bunk Feeder on Skids

• Trough is made of 14ga quality steel 8" deep - 34"W x 20" H
• Round corner 1-7/8 16ga tubing for easy moving
• Gray enamel finish
• Approximately 150 lbs.
• This item is LARGE and HEAVY. Please call for shipping estimate before ordering.

• Trough is made of 16ga quality steel 8" deep
• 34"W x 20" H
• Gray enamel finish

14' Bunk Feeder on Skids

• Trough is made of 14ga quality steel 8" deep - 34"W x 20" H
• Round corner 1-7/8" 16ga tubing for easy moving
• Gray enamel finish
• This item is LARGE and HEAVY. Please call for shipping estimate before ordering.

• Trough is made of 16ga quality steel 8" deep
• 34"W x 20" H
• Gray enamel finish (not powder coated)
• Hot rolled steel
• Legs are made with 1.900 pipe that is just under 2" in diameter (OD)
• This feed trough has drain holes but we can build them without drain holes if you prefer

• Trough is made of 16ga quality steel 8" deep
• 34"W x 20" H
• Gray enamel finish

6' Bunk Feeder on Skids

• Trough is made of 14ga quality steel 8" deep - 34"W x 20" H
• Round corner 1-7/8" 16ga tubing for easy moving
• Gray enamel finish

8' Bunk Feeder on Skids

• Trough is made of 14ga quality steel 8" deep - 34"W x 20" H
• Round corner 1-7\8" 16ga tubing for easy moving
• Gray enamel finish
• This item is LARGE and HEAVY. Please call for shipping estimate before ordering.

• Trough is made of 16ga quality steel 8" deep
• 34"W x 20" H
• Gray enamel finish

This new sheep and goat feeder is portable and easy to use

• trough is 11.5" high and 14.5" wide and 7.75" deep
• legs are 24" across
• made from 16 ga steel

• With this Optional 5' Feed Bunk Hay Rack, Bunk feeder converts to hay feeder in minutes
• For use with product number S173953 (see below)

• With this Optional 10' Feed Bunk Hay Rack, Bunk feeder converts to hay feeder in minutes
• 82 lbs
• For use with product number S173933

The Sheep and Goat Feeder comes with a special shield to keep hay off the wool of the sheep. Features rounded, not sharp, corners that make this feeder very sheep friendly and “sheep safe”. It is also designed to be extremely durable and take abuse from animals. Plus it is powder coated for an attractive and durable finish. Specs: 5' LONG x 35" HIGH x 25" WIDE W/ SHIELDED HAY RACK