Heavy Duty - 16 gauge - Hi-Country Gates

10% MORE MATERIAL THAN THE COMPETITION: Compare these thicknesses and their weights - Sioux Steel HiCountry Gate vs. Behlen Gate
Our HiCountry Gates are over 0.0665" thick vs. 0.057"			Our HiCountry Gates weigh 19.4 lbs vs. 17.5 lbs.

BETTER JOINTS AND BETTER WELDING Compare these corners & joints - Sioux Steel Gate vs. Behlen Gate
See the integrity of our tubes vs. the puckering and warping of the other. (Shown: Victory Gate in Prairie Gold, different model than HiCountry but same quality!)		Every tube is cut and tailored for a perfectly fitted connection before it's given a permanent, 360° weld

Z-Bar Vertical Beam (except 4' & 6' gates)

• One piece formed and punched to support crossbars.
• Crossbars run through the beam and are spot-welded.
• All steel parts become one, unbroken piece.

  SUPERIOR POWDER COAT FINISH
  Click Here to find out more...

Adjustable Hinge 3/4" - 3.5 lb.

• Allows gate to be moved up or down.
• Can also be replaced.
• Big 3/4" diameter solid steel hinge pin, takes tough wear.
• Gate swings 270°.
• Buckets Available.

  J-Bolt Hinge

• 3/4" diameter x 12" long hinge bolt.
• Adjustable in/out on bolt and up/down on gate.
• 1 5/8" and 2" available.
• Buckets Available.

  Heavy Duty Hinge - 5.3 lb.

• 1" Heavy-duty hinge.
• 1" Threaded rod.
• For use on any 2" gate.
• Two piece clamp with 1/2" hardware.
• Buckets Available.
  HINGES must be ordered separately and are available in buckets or can be ordered individually.

Available products: