|
| Crete-Heat Insulated Floor Panel System - 1`` Black Bag |
PRICE REDUCED !! - You cannot afford to install radiant floor heating without this product! Radiant Installation Simplified
- Cuts radiant system install time by as much as 2/3
- Designed to hold tube securely in place with wider fasteners
- 2 sizes available for both new construction and retrofitting existing buildings
- UV Protected Packaging for outdoor storage
An R-6 with a 23db sound reduction knob on the lower surface
Ready For Concrete
The Crete-HeatTMInsulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier and radiant tube holding grid that allows for simplied installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete is normally used. For basements, a 'light weight' concrete (sand instead of pea gravel) maybe used in 1-1/2" thickness. Uses 1/2" tubing. Total thickness is 1-7/8"
This Product is SOLD BY THE BAG - 12 PIECES PER BAG
1" Black Bag covers 96 Sq Ft. Determine your total square footage and divide by 96 for total BAGS needed.
|
| |
| Item no. 59347 |
| Today$132.14 |
|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
|
|
|
Sample Freight Cost Per Truck (2640 Pieces) |
Boston, MA ~ $2,100.00
Baltimore, MD ~ $1,500.00
Denver, CO ~ $1,950.00
Kansas City, KA ~ $1,000.00
Los Angeles, CA ~ $3,700.00
|
|
|
| The Q&A on this Product |
|
|
| QUESTION: I am working on an application utilizing an existing slab, that will be 6" below the threshold of a new sliding entrance door. I would like to use 2" of blue board insulation and 2" Crete heat topped with 2" of concrete. The square footage is 1107sq ft. I would like to know if this is a workable plan and the pricing for Crete heat with freight.
|
| ANSWER: 3" Crete-Heat and 3" concrete would be better. XPS only has a 52% R-Value retention vs EPS with a 94% rating. |
|
| QUESTION: Is there any benefit except for better "R" value when this product is installed over 3/4 in blue board? Additionally, is a vapor barrier required when installed over gravel and partial existing slab, or is the barrier part of the panel itself? Thanks! |
| ANSWER: Blue Board only has a 52% R-Value retention when in contact with the ground. EPS has a 94% R-Value retention.
The vapor barrier is part of the panel. |
|
| QUESTION: I don't see any pictures of pex tubing. can you install pex tubing in these mats? |
| ANSWER: These panels are designed to hold pex tubing. Please see the pictures and the installation of the tubing on the product page. You may have to scroll down to see the pictures of the installation. The pex tubing is sold in 300' lengths and is shown on the radiant heating page. |
|
| QUESTION: I need 43 bags of 2" shipped to 35010. What is my total cost. Also price for 1" |
| ANSWER: Thank you for your interest in the Crete-Heat Insulated Floor Panel System. I'll have a quote with shipping for you shortly. The quote will be based on 2,750 square feet (43 bags of the 2" cover approximately 2,750). If that's inaccurate, please let me know. Thank you, Robert Moore Sales@BarnWorld.com 720.238.2190 |
|
| QUESTION: what would cost be for 30 bags of 2" thick material (covers 1920 sq ft), shipped to 37854?
what would cost be for 20 bags of 1" thick material (covers 1920 sq ft), shipped to 37854? |
| ANSWER: Thank you for your interest. We will send you a quote shortly. |
|
| QUESTION: I`m in Troy, NY, adding a 200sqft addition. I`ll be pouring over an existing (cracked) slab. I can lpoir under as well as over the insulation, I have flexibility as to height.
What slab thickness do you suggest?
Where do I find info on proper thickness of crete-heat?
What are material/shipping charges? |
ANSWER: Thank you for your inquiry and patience. There isn`t an ideal slab thickness for using the Crete-Heat, but defer to your local building codes for an appropriate pour. The Crete-Heat comes in two thickness and offer different insulation r-ratings. The 2" is an R-10 and the 1" is an R-6.
If you`d like a shipping quote, please let me know which thickness you`d like and provide your shipping city and zip code and I`ll get a quote to you.
If you have any question, please let me know. Thanks, Rob Sales@BarnWorld.com (720) 238-2190 |
|
| QUESTION: We have and existing basement with a walkout. We want to add radiant floor heat but are limited on height due to the 16' patio door. We plan to install tile flooring. If your product is 2” including the tubing, how much more product do we have to put on top of it before we can mortar the tile down and what type of product should that be (gypcrete)? |
| ANSWER: At least 1.5" of light weight concrete above the 1" or 2" thick panel |
|
| QUESTION: I have a 2160 sq ft basement, new construction. Based on your info supplied, I'm assuming I need the 2" green board. Is the tubing including with the green board and is the price 132.14 per 10 pieces?
Bob (cell) 732 299 9035 |
| ANSWER: No tubing included. |
|
| QUESTION: Is this product available in Canada? If so, from whom? If not, do you ship to Canada? Can a independent home owner purchase this product from you? Do you sell in quantities less than a truckload? |
| ANSWER: Canada contact info available at www.crete-heat.com |
|
| QUESTION: Can you do a gypcrete over pour over this product and if so how thick would it have to be. We have a project where they have concrete structial planks and want to install radiant heat in the top coating that they pour over the planks. Need a answer ASAP. |
| ANSWER: Yes, We do this all the time. 1.5" from flat surface. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
powered by WordPress e-commerce company
