|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
Note: You must have equipment available to unload the cattle guard from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
Specifications
8" X 11.5lb Channel Support Beams
Comes standard with a grey enamel finish.
Pipe ends are capped with 12ga steel to prevent water from sitting in pipe
These cattle guards are fully welded and built to withstand the weight of a fully loaded tractor trailer.
Due to availability of pipe, cattle guards will be built with either 9 pieces of 4 1/2" outside diameter pipe, or 11 pieces of 3 1/2" outside diameter pipe |
|
| The Q&A on this Product |
|
|
| QUESTION: Hi My name is Tyler ARbogast. I am starting a breeding herd of miniuture jersey cattle and i have never used a cattle guard before. I was wondering if a cattle guard would fit my bill to contain mini jerseys. |
| ANSWER: Yes , it will contain them well . They work really good . |
|
| QUESTION: what wall thickness is the pipes ?
What is the out side dimensions of the pipes. ?
what would be the shipping cost for a 12' with box shipped to ohio?
what stops it from settling in to the ground ?
thank you in advance |
| ANSWER: The pipe is 156 wall ,4 1/2 , need a zip code to give you a correct price, and we have never had a problem with them settling in the ground. |
|
| QUESTION: With your cattle guards, may I assume it is up to the purchaser to provide the "box" on which the cattle guard is installed. Do you have specs for same?
Thank you.
|
| ANSWER: We have cattle guards that have a box on them or we have a box that can be set and the cattle guard will set in and can be taken out for easy clean out . |
|
| QUESTION: how much to ship four, plus removeable boxes to GOodyear, AZ 85338 |
| ANSWER: Shipping would be about $ 750.00. |
|
| QUESTION: Does a cattle guard keep deer out? |
| ANSWER: We reccomend using two guards side by side. Standard cattle guards are six
foot wide. Using two will make it twelve feet wide. We have had very good
feed back from other customers that have done it this way. |
|
| QUESTION: Do you have cattle guards for a horse pasture. I’ve been told they need to be made of 6” pipe
Have anything like that?
|
| ANSWER: I have sold these to customers with horses in the past, and have not had any negative feed back. |
|
| QUESTION: What would be the shipping cost for 1 cattle guard to Coupeville WA 98239? |
| ANSWER: Shipping would be about $ 605.00 |
|
| QUESTION: I need a cattle gard to keep Golden Retrievers in ackerage. What would you recommend and the price? Thanks. |
| ANSWER: You can not stop a dog with any cattle guard. The only thing that will stop a dog
is a gate. Dogs will walk right across a cattle guard. |
|
| QUESTION: For how much weight your cattle guards are rated? |
| ANSWER: We are working on getting the actual weight rating right now. These are really
good heavy duty cattle guards. We have sold many to the oil field, and never had
any complaint about them. Out of the thousands that we sold I have never had one
complaint or return. |
|
| QUESTION: What is the load bearing capacity of the boxed cattle guard? For the flat cattle guard, does the concrete form need to support and load of the guard? Thanks |
| ANSWER: These cattle guards will handle any vehicle that can legal drive on the highway.
If you pour concrete under the guard then yes it would have to support the weight
of the vihicles that you are driving over it. You can just pour a curb around it
and a good solid ground will be sufficent. |
|
| QUESTION: I am looking for a cattle guard to go across my ditch at the entry of a driveway (for vehicular access) that I am putting in. I do not need it to be very long, as my ditch is only 16" wide. Do you make them smaller??? |
| ANSWER: We can build any size that you want. |
|
| QUESTION: what are the weight limits on the cattle guards we would need a guard strong enough to hold a 7 ton tractor with hay? Not sure since the whole tractor would probably not be on the guard at once |
| ANSWER: That would not be a problem. |
|
| QUESTION: What are the nominal overall dimensions of this guard? |
| ANSWER: This cattle guard will be 10' x 6' |
|
| QUESTION: what is the distance between the pipe? |
| ANSWER: The distance will be between 3 1/2" and 4 1/2". |
|
| QUESTION: Do you deliver directly to rural farms, or do I have to go somewhere to pick it up? I live in Huntington, Utah. |
| ANSWER: Yes,we can drop ship this to your farm. The shipping will be a little higher
though. This will come in on a dry box truck. You will need to have a tractor
or some way to unload it. We ship to residential adresses about 50% of the
time, and this should not be a problem. Shipping to your farm in Huntington
would be about $ 360.00. |
|
| QUESTION: How effective are your cattle guards at keeping dogs from crossing into the driveway. |
| ANSWER: They will not stop a dog. The only thing that will stop a dog is a gate. |
|
| QUESTION: What is the weight of CG-10?
What is the weight of the removal box for a CG-10? |
| ANSWER: The CG-10 weighs about 1100lbs. The removable box will weigh about 225.00. |
|
| QUESTION: What is the floor made of,and how hight is it from the ground? |
| ANSWER: There is no floor in the cattle guard. If is made of 3 1/2" pipe it will
be 11 1/2" tall. If it is made with 4 1/2" pipe it will be 12 1/2" tall.
We build the cattle guards out of wich ever one is available. There is no
difference in the strength of the two. |
|
| QUESTION: What would the price and delivery time be for three CG-10 to be picked up FOB Cleburne, TX. |
| ANSWER: |
|
| QUESTION: Will these guard gates work for sheep and goats? How much would shipping be to Wilmington, NC? |
| ANSWER: I am sorry but they will not work for sheep and goats. The only way I no to keep
a goat in is by using a gate. |
|
| QUESTION: will they keep dogs in |
| ANSWER: Sorry but they will not. |
|
| QUESTION: will these cattle guards work for containing horses and mules? |
| ANSWER: These cattle guards should keep most horses in. Unless you have a horse that
is always getting out it would probably be fine. I am not sure about the mules.
They are a little more sure footed than a horse, so I do not want to tell you
that it will. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
HOME
powered by