|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
Note: You must have equipment available to unload the cattle guard from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
Specifications
20' Long X 6' Wide Flat Cattle Guard
8" X 11.5lb Channel Support Beams
Comes standard with a grey enamel finish.
Pipe ends are capped with 12ga steel to prevent water from sitting in pipe
Skirt is made of 12ga steel
These cattle guards are fully welded and built to withstand the weight of a fully loaded tractor trailer.
Due to availability of pipe, cattle guards will be built with either 9 pieces of 4 1/2" outside diameter pipe, or 11 pieces of 3 1/2" outside diameter pipe.
|
|
| The Q&A on this Product |
|
|
| QUESTION: I WILL BE ORDERING THIS PRODUCT CG - 20 -B ( 1 each ) can i get a shipping cost for delivery to 930 main street riverside, ca 92501 and could i get a spec sheet for install for my submittal package. you are speced on the project. thank`s AL GOMEZ FENCE CORP |
| ANSWER: the shipping will be about $1,943.00 . |
|
| QUESTION: what would be the cost of shipping to rolling hills, wyoming for 5 each of the CG-20-B Cattle Guard and is advertised price valid? if not please update. Thank You. |
| ANSWER: I will need a zip cod to give a quote |
|
| QUESTION: shipping to Devine, Texas 78016 |
| ANSWER: The shipping would be about $600.00
|
|
| QUESTION: What is the lead time on a 20' cattle guard with the integral box |
| ANSWER: Can ship out within a week of purchase order. |
|
| QUESTION: I need to know what is the lead time on a 20' cattle guard with the integral box |
| ANSWER: Can ship out within a week of purchase order. |
|
| QUESTION: THIS IS NOT AN ORDER YET. IT'S STILL IN THE BID STAGE. WHAT IS THE TOTAL COST INCLUDING SHIPPING TO WHY ARIZONA ( ZIP 85321 - ALSO PLEAS FAX DETAILS ON INSTALLATION TO 520-624-1062. THANKS, BOB |
| ANSWER: Shipping would be about $790.00. Im sorry but I do not have any installation instructions.
|
|
| QUESTION: What is the availability of a CG-20 B? If I can get the engineer to approve it, I will need one shipped to Mooresville, NC. They're using it in a construction entrance to help remove mud from truck tires.
Thanks,
Shane Poole
Showalter Construction Co., Inc.
Project Manager
704-400-4848
|
| ANSWER: Shipping to a buisness in Mooresville NC would be about $ 685.00
|
|
| QUESTION: What material is the cattle guard made from? |
| ANSWER: The channel underneath it is 8" x 11.5". The box is made of 12ga hot rolled
steel. The pipe is made of either 3" or 4" pipe. Pipe in our are is becoming
hard to find, so we have to use which ever one is available. There is no difference
in the strength of them. These cattle guards are built with the highest quaility
and best materials. I have never had an unsatisfied customer. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
HOME
powered by