|
| 20 foot Cattle Guard with Fixed Wings |
This cattle guard features less expensive Fixed (welded-on) wings. Fixed wings are more difficult to transport, so shipping costs are greater. Bolt-on wings cost more initially, but you save on shipping costs. If you need bolt-on wings, please order a standard Flat or Boxed cattle guard. Please select the wing features based on your needs and your proximity to FOB Cleburne, TX. |
| |
| Item no. CGW-20 |
| Today's Sale Price: $2,547.83 |
|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
Note: You must have equipment available to unload the cattle guard from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
Specifications
20' Long X 6' Wide Flat Cattle Guard With Wings
8" X 11.5lb Channel Support Beams
Comes standard with a grey enamel finish.
Pipe ends are capped with 12ga steel to prevent water from sitting in pipe
Winged cattle guards make it more difficult for cattle to cross ends.
Wings add 18" on each side of the Cattle Guard.
Wings are made of 1 7/8 outside diameter 16ga tubing.
These cattle guards are fully welded and built to withstand the weight of a fully loaded tractor trailer.
Due to availability of pipe, cattle guards will be built with either 9 pieces of 4 1/2" outside diameter pipe, or 11 pieces of 3 1/2" outside diameter pipe.
|
|
| The Q&A on this Product |
|
|
| QUESTION: How much would it cost to ship a 20' cattleguard with removable box and wings to 10151 Florin Road, Sacramento CA 95782? Can you also give me a price for the cost of shipping 2 16' cattleguards as well. Thanks |
| ANSWER: Are the 2 16 the same as the 20 . |
|
| QUESTION: Do you know of any one that makes a precast concrete foundation for this product? Phone number for them? Thank you. |
| ANSWER: No i really do not there should be a contractor in your area that can help you. |
|
| QUESTION: Hello, I’m interested in using Cattle guard CGW-20 (20’ long x 6’ wide) for a Treatment Plant project for the City of Hampton Georgia. What would the approx. shipping cost be to 30228 and also what would be the approx. turnaround time once an order was placed? Do you make pre-cast concrete foundations for this product? Does this product meet H20 loading(16ton per axle)? Would you be able to supply shop drawings and a specification for this product? |
| ANSWER: The shipping would be about $1050.00 , and would be about a week out . We do not make a pre-cast concrete foundation and they plenty strong to hold up to an big truck . |
|
| QUESTION: What are the shipping charges to Morristown NJ?
What are the installation requirements? Depth of trench…gravel…etc?
Do you know a contractor in this area that could install it?
|
| ANSWER: I would need a zip code to give a price. |
|
| QUESTION: I am interested in ordering a 20' cattleguard with removable box and wings. Delivered to Clayton, Ca 94517. Please quote complete price. Also, approximate delivery timetable after order is placed. We will have the ability to unload. Thank you. |
| ANSWER: Shipping would be about $ 2100.00. It usually takes about 2 weeks for delivery after placing the order. |
|
| QUESTION: Reguesting the shipping charges to zip code 28660 for a 20 foot cattle guard with wings. Item #cgw-20. |
| ANSWER: Shipping would be about $ 1400.00. |
|
| QUESTION: How many channel frame braces are under your 16 ft. and 20 ft units? Your photos only show 4. Thanks. |
| ANSWER: There is 5 channels on the 16'ers and 6 channels on the 20'ers |
|
| QUESTION: I need to order CGW-20 with box, I need to order 4 of these. I tried to do it online it wouldn't let me, I tried to call but just get message.
Could somebody call me at 951-845-8023, my name is Traci |
| ANSWER: Mark will be calling you shortly. |
|
| QUESTION: May I order 3 of these today? |
| ANSWER: I do not see why not. |
|
| QUESTION: can you ship these to Fort Bridger Wy. interstate 80 exit 30 zip is 82933 |
| ANSWER: As long as you have a way to unload this cattle guard. It ways about 2250lbs
so you will need some kind of equipment. It will come on an enclosed box trailer.
Shipping would be about $ 1100.00. |
|
| QUESTION: do you have any stores/distributors in missouri?
|
| ANSWER: Sorry but we do not. We can give you a shipping quote if you would like. |
|
| QUESTION: Do you have any distributors in Califonia? |
| ANSWER: I am sorry but I do not. I do ship them to California a lot on a dry box truck.
If you give me a zip code I can give you an estimate on shipping. |
|
| QUESTION: can you send me shop drawings for install, I am having 4 purchased by camp san luis obispo and will be installing them. |
| ANSWER: I do not have any shop drawings made up. All cattle guards are built by hand
not using any jigs, so the cattle guard could very just a little bit. The best
thing to do is wait until the guard is on site, so that you can take your exact
measurements. Also the height could very due to the shortage of pipe in our area. Cattle guards are built using either 3 1/2" OD pipe or 4 1/2 OD pipe. I do not no wich one yours will be built with until I actually start to build it. There is
no difference in the strenght of the pipe. Using 4 1/2 we use 9 pipes, and using
3 1/2 we use 11 pipes. We just have to build it with wich ever we have on hand at
the time. |
|
| QUESTION: Can I get shop drawings after I buy it? I need them for the engineer to built the concrete trench to sit on.
Thanks |
| ANSWER: I can provide you with simple line drawings with all of the dimensions that
you should need. |
|
| QUESTION: Can I get it on natural steel finish? Not Painted? How much to ship it to ZIP code 94558? and what is the time line to get this product? |
| ANSWER: Yes, we can ship this unpainted. It would ship in approx. 10 buisness days.
Shipping to a buisness would be about $ 700.00 Shipping to a home adress would be
about $ 850.00. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
HOME
powered by