|
| 16 Foot Cattle Guard with Integral Box |
This box is welded to the grate as one integral unit. If you wish to have the removable box option, please choose the 16 Foot Flat Cattle Guard and add the Removeable Box option on that page.
Dimensions: 16` X 6` X 12.5"
Made with 8" channel
Designed to withstand the loads of full tractor trailers |
| |
| Item no. CG-16B |
| Today's Sale Price: $1,614.73 |
|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
Note: You must have equipment available to unload the cattle guard from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
Specifications
16' Long X 6' Wide Flat Cattle Guard
8" X 11.5lb Channel Support Beams
Comes standard with a grey enamel finish.
Pipe ends are capped with 12ga steel to prevent water from sitting in pipe
Skirt is made of 12ga steel
These cattle guards are fully welded and built to withstand the weight of a fully loaded tractor trailer.
Due to availability of pipe, cattle guards will be built with either 9 pieces of 4 1/2" outside diameter pipe, or 11 pieces of 3 1/2" outside diameter pipe.
|
|
| The Q&A on this Product |
|
|
| QUESTION: Total Price including shipping and tax for CG-16-B shipped to Winston, NM 87943? |
| ANSWER: The shipping will be about $850.00 |
|
| QUESTION: 1. How much does the 6'x 16' with box weigh?
2. Are the cattle guards painted?
3. Is there a discount for multiple units?
4. What is cost of shipping for four units on on e truck to Pecos, TX 7922.
Thanks,
Jack Canon |
| ANSWER: It weigh about 1,700lb , they are primed gray , no, and it will cost about $800.00
let me know if it will be o.k.. |
|
| QUESTION: Shipping cost on the GC-16B to 85616 (Huachuca City, Arizona)? |
| ANSWER: The shipping cost would be about $1,400.00 |
|
| QUESTION: What is the shipping cost to ZIP 98203 for CG-16-B? Are there any other costs? |
| ANSWER: The Shipping on this would be about $2,150.00 , let me know if you want it . |
|
| QUESTION: Item # CG-20-B qty= 2 Item#CG-12-B qty= 1 Shipping charges to ZIP 28604 (NC)? total cost? Tax? Thank you, Andy |
| ANSWER: The shipping total would be $ 1200.00. You would need to contact customer service
at Barn World for a total on the order at (303) 952-0830 |
|
| QUESTION: If I buy one with the box, do I need to concrete the base? |
| ANSWER: No you do not. You can build the road up to it, or you can dig a hole and
put it in to the hole. |
|
| QUESTION: What gauge steel is the 14' cattle guard |
| ANSWER: The pipe is made of no lighter than .188 wall. The channel is 8" x 11.5 Channel. |
|
| QUESTION: Can this cattle guard accomodate a Simi w/trailer with 48000 lbs/axel loads? |
| ANSWER: Will not be a problem. |
|
| QUESTION: how long will it take to get it |
| ANSWER: It depends on where it is going. We had a case recently were they ordered it on Thursday and because they needed it quickly, and the right delivery situation came up, we were able to get it to them from Texas to Nebraska the next day. But it does not always work out that way. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
HOME
powered by