|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
| Pick up available This item is available for customer pick FOB Cleburne, Texas. After you place your order we will arrange for you to pick up your order. |
|
|
|
Note: You must have equipment available to unload the cattle guard from the delivery vehicle when it arrives. The delivery truck will require you to unload the cattle guard with a loader or fork lift or some other means upon delivery.
Specifications
12' Long X 6' Wide Flat Cattle Guard
8" X 11.5lb Channel Support Beams
Comes standard with a grey enamel finish.
Pipe ends are capped with 12ga steel to prevent water from sitting in pipe
Skirt is made of 12ga steel
These cattle guards are fully welded and built to withstand the weight of a fully loaded tractor trailer.
Due to availability of pipe, cattle guards will be built with either 9 pieces of 4 1/2" outside diameter pipe, or 11 pieces of 3 1/2" outside diameter pipe. |
|
| The Q&A on this Product |
|
|
| QUESTION: Need price and availability on 1ea 12’ cattle guard boxed and 1ea 14” boxed delivered to Luna New Mexico 87824 or you can ship to Mesa Az 85212 if the freight is cheaper
|
| ANSWER: The shipping will be about $510.00 to Luna , NM. |
|
| QUESTION: Do you have any detailed pictures showing the grid spacing on the cattle guards? This is for residential use and I want to be sure that kids feet [children, not goats] won't get caught.
Thanks.
Peter Norris |
| ANSWER: The spacing is big enough for a cows foot to go inside of it, so it would be possible for a kid's foot to go in it. |
|
| QUESTION: How much does this cattle guard weigh? (how large of a forklift will I need to unload it?) |
| ANSWER: It will weigh about 1,500 lb , a 3,000lb forklift will be fine . |
|
| QUESTION: How much weight can your cattle guards take. We are going to be doing some cement work and need something strong enough to handle a cement truck to go over. And also trucks delivering building materials. |
| ANSWER: That would be no problem. |
|
| QUESTION: What would shipping charges be to Albany Oregon. |
| ANSWER: Shipping to a residence would be about $ 735.00. |
|
| QUESTION: I need to know the gauge of the pipe and the weight which the guard can support. I will be using the cattle guard as part of a wash down station for construction vehicles (up to 40,000 pounds) |
| ANSWER: The thickness of the pipe may vary.It will be a minimum of 3/16. These cattle guards will not have any problem with the 40,000lbs. |
|
| QUESTION: u say that this guard can be put on flat ground, so u do not need a pit? will a car drag on it while crosssing? |
| ANSWER: Yes, this can be put on the ground, but you will have to build the road up level
to it. You can dig a pit so that you do not have to build the road up so high if
you want to. |
|
| QUESTION: What are the standard dimensions for this item? 12' wide x ?? deep x ?? long? |
| ANSWER: A CG-12B is 12' long X 6' wide. The depth depends on what size pipe that we
use. We will use either 3 1/2" or 4 1/2". If we use the 3 1/2" it will be
11 1/2" tall. If it is 4 1/2" it will be 12 1/2" tall. We will use wichever
size pipe that we have abailable. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
HOME
powered by