First and foremost the least desired damage is injury to the animal. Secondly tearing the webbing would require a splice that may show up in an unsightly place. To minimize these two least desired problems the Safe-Fence Tensioners were designed to hold the webbing tight, swivel left to right and up and down to absorb concussion. They will also bend open to release the webbing if the horse absolutely runs full force through the fence. They are easily reshaped for continued use. Our insulators hold the webbing firm, reducing wind friction and down line stretching if the fence is hit.
All Safe-Fence electrical connections are tight to avoid arcing but are easily removed to shut off power to specific strands of areas of fence when needed.
 |
|
|
|
|
|
|
|
|
| 3 Way Tensioner for 1 1/2``Polytape - Black Item #: R-55-BC2 |
$10.99
|
Used at cross fence junctions. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated barrel allowing for up and down elevation changes which prevents the tape from bunching in the tensioner and insulators.
2 per package |
|
 |
| 3 Way Tensioner for 1 1/2``Polytape - White Item #: R-55-WC2 |
$10.99
|
Used at cross fence junctions. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated barrel allowing for up and down elevation changes which prevents the tape from bunching in the tensioner and insulators.
2 per package |
|
 |
| 3 Way Tensioner for 2`` Polytape Item #: R2-55WC1 |
$7.52
|
The stainless steel triangular tensioners holds the webbing tight, deters tearing from impact and allows easy re-tighting if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes which prevents the tape from bunching in the tensioner. White Only. 1 per pack. |
|
 |
|
|
|
|
| CLAW INSULATOR TEE POST - Black Item #: R-CT-25-B |
$6.65
|
Claw Insulator for Tee-Posts is comparable to the R-CW25 Wood Post insulator. New larger size for up to 3/8" material. 25 per bag. |
|
 |
| CLAW INSULATOR TEE POST - White Item #: R-CT-25-W |
$6.65
|
Claw Insulator for Tee-Posts is comparable to the R-CW25 Wood Post insulator. New larger size for up to 3/8" material. 25 per bag. |
|
|
| CLAW INSULATOR WOOD POST - Black Item #: R-CW-25-B |
$6.65
|
A high strength wood post insulator for fences that will suffer greater abuse. Made for the stronger materials as in twisted or braided rope, Poly Coats and High Tensile wire. The claw design allows the material to slide upon impact. New larger size for up to 3/8" material. 25 per bag. |
|
 |
| CLAW INSULATOR WOOD POST - White Item #: R-CW-25-W |
$6.65
|
A high strength wood post insulator for fences that will suffer greater abuse. Made for the stronger materials as in twisted or braided rope, Poly Coats and High Tensile wire. The claw design allows the material to slide upon impact. New larger size for up to 3/8" material. 25 per bag. |
|
|
| Contact Clamp - Black Item #: R-9-BC2 |
$7.70
|
The R-9 contact clamp is an electrical connector used to attach the fence charger directly to the webbing anywhere in fence line if the R-79 wire connector cannot be used at a tensioner. It may also be used to pick up power when adding a cross fence to an existing fence. 2 pack. |
|
 |
| Contact Clamp - White Item #: R-9-WC2 |
$7.70
|
The R-9 contact clamp is an electrical connector used to attach the fence charger directly to the webbing anywhere in fence line if the R-79 wire connector cannot be used at a tensioner. It may also be used to pick up power when adding a cross fence to an existing fence. 2 pack. |
|
|
| Corner Tensioner for 1 1/2`` Polytape - Black Item #: R-50-BC2 |
$9.29
|
Used in corners, tape gates and inline elevation changes greater than 10 degrees. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated barrel allowing for up and down grade changes which prevents the tape from bunching in the tensioner and insulators.
2 per package |
|
 |
| Corner Tensioner for 1 1/2`` Polytape - White Item #: R-50-WC2 |
$9.29
|
Used in corners, tape gates and inline elevation changes greater than 10 degrees. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated barrel allowing for up and down grade changes which prevents the tape from bunching in the tensioner and insulators.
2 per package |
|
 |
| Corner Tensioner for 2`` Polytape - White Item #: R2-50WC1 |
$5.06
|
Used in corners, tape gates and inline elevation changes greater than 10 degrees. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes which prevents the tape from bunching in the tensioner.
1 per package |
|
 |
|
|
|
 |
|
|
| End Tensioner for 1 1/2`` Polytape - Black Item #: R-40-BC2 |
$6.49
|
Fits all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes which prevents the tape from bunching in the tensioner. 2 per package. |
|
 |
| End Tensioner for 1 1/2`` Polytape - White Item #: R-40-WC2 |
$6.49
|
Fits all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tightening if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes which prevents the tape from bunching in the tensioner. 2 per package. |
|
 |
| End Tensioner for 2`` Polytape Item #: R2-40WC1 |
$3.21
|
Stainless steal triangular tensioner holds the webbing tight, deters tearing from impact and allows easy re-tighting if the webbing becomes loose due to impact or stretching from snow and ice load. The tensioners swivel back and forth and rotate around the plastic insulated post brackets allowing for up and down grade changes which prevents the tape from bunching in the tensioner. |
|
|
| Gate Handle for 1 1/2`` Polytape - Black Item #: R-12-B |
$5.88
|
The best electric gate handle made and is practically unbreakable. The handle includes a tensioner connector to attach wide polytape. The internal spring is replaceable if damaged. |
|
 |
| Gate Handle for 1 1/2`` Polytape - White Item #: R-12-W |
$5.88
|
The best electric gate handle made and is practically unbreakable. The handle includes a tensioner connector to attach wide polytape. The internal spring is replaceable if damaged. |
|
|
|
|
| Gate Kit for 1 1/2`` Polytape - Black Item #: R-22-B |
$15.90
|
This is an excellent electric gate kit that includes the R-12 gate handle, 1 - R-50 , 1 R-40 tensioner, a gate hook plate and 20 feet of 1 1/2" Safe-Fence webbing. |
|
 |
| Gate Kit for 1 1/2`` Polytape - White Item #: R-22-W |
$15.90
|
This is an excellent electric gate kit that includes the R-12 gate handle, 1 - R-50 , 1 R-40 tensioner, a gate hook plate and 20 feet of 1 1/2" Safe-Fence webbing. |
|
 |
| Gate Plates - Stainless Steel Item #: R-41-C4 |
$4.61
|
For use with Safe-Fence End Tensioners. Accepts gate handle hook for polytape, hot rope, or spring gates. 4 pack. |
|
|
|
 |
| HIGH TENSILE WIRE RATCHET Item #: P-R100 |
$2.79
|
For High Tensile wire, Hot-Coat, and Poly-Coat. Turns with use of a 5/8" wrench or socket. 1 per pack |
|
|
|
|
| Insuloc Extension - Black Item #: N-EXT-B |
$4.18
|
A 3-1/2 inch extension that fits on most T-Posts and all wood or vinyl posts. For use with Insuloc Clips. 4 per bag. |
|
 |
| Insuloc Extension - White Item #: N-EXT-W |
$4.18
|
A 3-1/2 inch extension that fits on most T-Posts and all wood or vinyl posts. For use with Insuloc Clips. 4 per bag. |
|
|
|
 |
|
|
| Insuloc T-Post Cap - Black Item #: N-CTP-B |
$6.97
|
Safety Caps for T-Posts.For use with Insuloc Clips. All clips can be attached on either side as well as wire/rope clips on the top to create a hot/ground fence in poor soils. 10 per bag |
|
 |
| Insuloc T-Post Cap - White Item #: N-CTP-W |
$6.97
|
Safety Caps for T-Posts.For use with Insuloc Clips. All clips can be attached on either side as well as wire/rope clips on the top to create a hot/ground fence in poor soils. 10 per bag |
|
|
|
 |
|
|
|
 |
|
|
| Insuloc Wire/Rope Clip - Black Item #: N-WRC-B |
$1.56
|
Attaches polywire, smooth wire, coated wire, high-tensile wire and ropes up 3/8th diameter to the Insuloc backs, extensions and caps. 25 per bag. |
|
 |
| Insuloc Wire/Rope Clip - White Item #: N-WRC-W |
$1.56
|
Attaches polywire, smooth wire, coated wire, high-tensile wire and ropes up 3/8th diameter to the Insuloc backs, extensions and caps. 25 per bag. |
|
|
| Insuloc Wood Post Back - Black Item #: N-WPB-B |
$4.06
|
For use with Insuloc clips. Attaches to wood or vinyl posts. Use S-16-C stainless screws for vinyl sleeves or W-16-C stainless screws for wood posts. 25 per bag. |
|
 |
| Insuloc Wood Post Back - White Item #: N-WPB-W |
$4.06
|
For use with Insuloc clips. Attaches to wood or vinyl posts. Use S-16-C stainless screws for vinyl sleeves or W-16-C stainless screws for wood posts. 25 per bag. |
|
 |
|
|
|
|
| PIN LOCK INSULATOR/TEE POST - Black Item #: TP-PL25-B |
$6.65
|
A tough insulator for wire, polywire and ropes up to 3/8 diameter. Wraps around the back bar of the tee post for secure for greater security. 25 per bag. |
|
|
| PIN LOCK INSULATOR/TEE POST - White Item #: TP-PL25-W |
$6.65
|
A tough insulator for wire, polywire and ropes up to 3/8 diameter. Wraps around the back bar of the tee post for secure for greater security. 25 per bag. |
|
|
|
|
|
 |
|
 |
| REWIND REEL Item #: R-18 |
$30.97
|
A light weight yet durable spooling device for portable fence applications. Holds 200 feet of Safe-Fence 1 1/2" polytape, 660 feet of rope or braid and 1320 feet of polywire. Hooks onto existing fence line or over a rod through the handle. Locking side pins hold material tight. |
|
 |
| ROPE END OR CORNER LAG PULLEY Item #: R-65-C4 |
$8.32
|
The R-65 corner pulley is a high strength corner and end post insulator for Hot Rope, Braid, Wire, Poly-Coat, Hot-Coat, and polywire. Designed for use on wood posts only with a heavy duty rust resistant lag and UV resistance polyethylene insulator. 4-pack |
|
 |
|
 |
|
 |
| Rope Splicer Single Post - 1/4`` Item #: R-49-C4 |
$5.85
|
A splice clamp for joining or repairing rolls of Hot Rope or Hot Braid and also to terminate rope and braid at an end of a run using the R-65 corner pulley. This clamp provides a strong connection with maximum conductivity. 4 pack. |
|
|
| Safe-Fence Polytape Insulator - Black Item #: R-16-B |
$7.79
|
A strong 1 1/2 wide polytape insulator for wood or vinyl line posts. Made of impact resistant polyethylene. The locking face holds the webbing tight reducing wind vibration. 25 per bag. S-16-C or W-16-C stainless steel screws sold separately. |
|
 |
| Safe-Fence Polytape Insulator - White Item #: R-16-W |
$7.79
|
A strong 1 1/2 wide polytape insulator for wood or vinyl line posts. Made of impact resistant polyethylene. The locking face holds the webbing tight reducing wind vibration. 25 per bag. S-16-C or W-16-C stainless steel screws sold separately. |
|
 |
| Safe-Tee-Sleeve - Black Item #: R-1755-B |
$6.31
|
Safe-Fence vinyl sleeves are attractive, functional, affordable and easy to install. They add to the "nice rail look" when using Safe-Fence polytape for a fraction of the cost of vinyl. The Safe-Tee-Sleeves measure 2" x 2" x 5 feet long and will fit over any steel T-post. |
|
 |
| Safe-Tee-Sleeve - White Item #: R-1755-W |
$6.31
|
Safe-Fence vinyl sleeves are attractive, functional, affordable and easy to install. They add to the "white rail look" when using Safe-Fence polytape for a fraction of the cost of vinyl. The Safe-Tee-Sleeves measure 2" x 2" x 5 feet long and will fit over any steel T-post. |
|
 |
| SCREW IN RING INSULATOR 25 BAG - Black Item #: P-44-B |
$6.35
|
A unique wood post insulator for rope and wire with the screw molded into the thick polyethylene body. This very strong insulator is able to hold High Tensile Wire and Hot-Coat or Poly-Coat fencing. Black only, 25 per bag. |
|
|
| SCREW IN RING INSULATOR 25 BAG - White Item #: P-44-W |
$6.35
|
A unique wood post insulator for rope and wire with the screw molded into the thick polyethylene body. This very strong insulator is able to hold High Tensile Wire and Hot-Coat or Poly-Coat fencing. 25 per bag. |
|
|
| SNAP ON ROD INSULATOR Item #: P-8 |
$3.15
|
A quick snap on insulator for 1/2" steel or fiberglass rod. Will accommodate wire, polywire, 1/2" polytape, rope or braid. White, 25 per bag. |
|
 |
| Splice Buckle for 1 1/2`` Polytape Item #: R-24-C4 |
$6.08
|
The R-24 is a stainless steel splice buckle for joining rolls of 1 1/2" webbing or splicing tears caused from impact. The webbing threads into splice buckle similar to the tensioner. Comes in a pack of 4. Extras should be purchased so that repairs can be made quickly if necessary. |
|
 |
| Splice Buckle for 1/2`` Polytape - Stainless Steel Item #: R-39-C4 |
$3.72
|
For joining rolls of 1/2" webbing or making repairs. It provides a positive electrical connection to insure good current flow. You should never tie knots in polytape to join rolls or make repairs as arching and reduced power will occur. 4 pack. |
|
 |
|
 |
| Spring Gate Kit Item #: R-14-W |
$14.85
|
6 - 24 foot spring gate with hardware, is excellent for electrically bridging wide gate openings. Contracts to 32" when open and includes the unique Safe-Fence tensioners with special gate hook plates to attach the spring and handle to any type of electric fence system. 1 per package. White only. |
|
 |
|
 |
| Stainless Steel Screws for Vinyl Sleeves Item #: S-16-C |
$3.50
|
These rust resistant, stainless steel screws are used to install the R-16 insulators to line posts. The 3/4" long, S-16 screw is used for the R-1755 Safety Sleeves. 50 per bag. |
|
 |
| Stainless Steel Screws for Wood Posts Item #: W-16-C |
$4.61
|
These rust resistant, stainless steel screws are used to install the R-16 insulators to line posts. The 1 1/2" long W-16 screw is used for wood posts. 50 per bag. |
|
 |
|
|
| Tee Post Polytape Insulator - Black Item #: TP-25-B |
$6.08
|
This insulator clips onto steel tee-posts to hold webbing secure. For proper installation of Safe-Fence always use wood posts for corners and gates, never tee-posts. 25 per bag. |
|
 |
| Tee Post Polytape Insulator - White Item #: TP-25-W |
$6.08
|
This insulator clips onto steel tee-posts to hold webbing secure. For proper installation of Safe-Fence always use wood posts for corners and gates, never tee-posts. 25 per bag. |
|
 |
| Warning Sign Item #: P-WS |
$1.59
|
8" wide by 4-1/2" tall. Warns of electric fencing in use. |
|
 |
| Wire Connector Item #: R-79-C4 |
$4.17
|
The Wire Connector is used to attach the fence charger to the fence, strand to strand, and burial wire under gates. It bolts to a hole in the tensioner ring hook for a positive yet easy to remove connection. Only use high voltage fence wire rated for a minimum of 12,000 volts. 4 pack. |
|
|
| Wood Post Sleeve - Black Item #: R-4005-B |
$20.39
|
Safe-Fence vinyl sleeves are attractive, functional, affordable and easy to install. They add to the "white rail look" when using Safe-Fence polytape for a fraction of the cost of vinyl. The R-4005 Wood Post Sleeves measure 4" x 4" x 5 feet long and are designed to fit over a nominal 4" X 4" wood posts. Both are available in white or black with durable polyethylene caps. |
|
 |
| Wood Post Sleeve - White Item #: R-4005-W |
$20.39
|
Safe-Fence vinyl sleeves are attractive, functional, affordable and easy to install. They add to the "white rail look" when using Safe-Fence polytape for a fraction of the cost of vinyl. The R-4005 Wood Post Sleeves measure 4" x 4" x 5 feet long and are designed to fit over a nominal 4" X 4" wood posts. Both are available in white or black with durable polyethylene caps. |
|