 |
| 8 3/8 Plain Plasticell Item #: 8BWFO |
$17.50
|
"Plasticell" is an injected molded plastic raised cell sheet.
The best plastic foundation available.
Tested and proven as the ultimate in plastic foundation.
Precise deep cell walls.
Uniform exact cells.
Fits 9 1/8 inch frames Foundation size is 8 3/8 inches x 16 3/4 inches.
Use in wedge top bar or grooved top bar frames.
Carton of 10. |
|
 |
| Bee Cover with Inner Cover Item #: 8BWHC |
$32.39
|
| A strong, rigid cover with full thickness interlocking side rims.
Interlocking ends are pre-drilled for easy handling.
A heavy galvanized metal top has all four edges turned down to protect the edges of the wood.
Metal top has pre-punched holes for nailing.
This entire cover "telescopes" down over the inner cover and a portion of the top super.
An inner cover is included. |
|
 |
| Bee Entrance Feeder Item #: 8BWEF |
$8.30
|
| Entrance feeder fits snugly into the entrance of the colony.
Works best in warm weather (late spring, summer, early fall).
Perforated metal cap is included with each feeder.
Cap fits standard Mason jar (jar not included).
Feed level visible at all times.
Refill jar without opening hive. |
|
 |
| Hive Body Select Item #: 8BHBS |
$25.00
|
| Our woodenware is manufactured from hand selected ponderosa pine.
Each board has been carefully moisture metered to assure its proper moisture content before it is precision milled into the finished product.
All our hive bodies have "pre-drilled" holes for nails to prevent splitting during assembly.
Handholds are taper cut for easy gripping
Moisture Metered before cutting to prevent warping
Uniform Interlocking Joints for strength
Ponderosa Pine from the Northwest, the best wood for the job
Uniform Frame Rests provides the proper "Bee Space"
Nails included, not assembled. |
|
 |
| Hive Bottom Board Item #: 8BWBB |
$20.20
|
| The standard 10-frame bottom board is the floor of the hive and is an essential part of the hive.
It provides the hive entrance and proper spacing for the bees to work.
Reversible feature allows full 3/4" summer entrance or 3/8" entrance when reversed for winter. Unassembled. |
|
 |
| Hive Frames 9 1/8 Item #: 8BWFR |
$18.25
|
| Carton of 10 Grooved Top Bar/Grooved Bottom Bar Frames.
18% more wood in end bars ( Full 3/8" Thickness) Grooved bottom bar is stronger and easier to use.
Foundation is placed in bottom bar groove and top bar groove.
This frame works best with Duragilt or Plasticell foundation Fits 9 1/8 inch hive bodies (Deep Supers).
Nails included. Not Assembled. |
|
 |
| Hive Stand Item #: 8BWHS |
$18.85
|
To eliminate moisture problems and provide insulation, it is important to keep the hive from making contact with the ground.
This durable wood hive stand protects the hive bottom board and gives bees an angled landing area.
Unassembled. |
|
 |
| Honey Super W/Frames Item #: 8HS |
$30.65
|
| Our woodenware is manufactured from hand selected Ponderosa Pine.
Each board has been carefully moisture-metered to assure its proper moisture content before it is precision milled into the finished product.
All our supers have "pre-drilled" holes for nails to prevent splitting during assembly.
Comes unassembled with 10 Wedged Top Bar Frames.
Nails included. |
|
 |
| Standard Bee Escape Item #: 8SBE |
$3.40
|
| Standard Bee Escapes, bee escapes are one-way doors which let the bees leave the supers but not return.
The escape is placed beneath the supers of honey to be removed.
(When removing more than one super of honey from an individual hive, we recommend placing an empty shallow super under the escape board to allow more space.)
Supers are usually free of bees within 2 - 24 hours and no chemicals are used.
This bee escape is placed in the center opening of an inner cover above. |
|
 |
| Wood Bound Excluder Item #: 8WBE |
$23.80
|
The wood bound excluder fits standard hive. Electrically welded, precisely spaced metal wires make the grid system that is edged (bound) on all sides with quality fitted wood. Easy to use and remove. Provides proper bee spaces. |
|
HOME
powered by