Radiant Floor Heating from Barn World with the Crete-Heat System

Radiant Floor Heating from Barn World with the Crete-Heat System

We have 2 easy to install Do-It-Yourself Hydronic Space Heating kits with 7kW and 11kW electric micro-heaters. The Radiant-Made-Simple system is designed specifically for installation in poured concrete basement and garage slabs that are well insulated below and around the outside edge of the slab. Use these hydronic heating kits to heat up to 900 or 1000-1800 square feet of single zone basement, garage, green house or home addition. Radiant-Made-Simple Radiant Heat Systems provide an energy efficient (approaching 99%) solution for concrete floor heating.

CHOOSE YOUR RMS MODEL ACCORDING TO THE SPACE YOU WISH TO HEAT IN YOUR BASEMENT OR GARAGE, AND YOUR ELECTRICAL REQUIREMENTS

Square Feet RMS Model

Loops

BTU/h

350 to 600 RMS-7

2

23890

610 to 900 RMS-7

2

23890

910 to 1200 RMS-11

3

37540

1210 to 1500 RMS-11

4

37540

1510 to 1800 RMS-11

5

37540

ELECTRIC SERVICE REQUIREMENTS

MODEL

AC VOLTAGE

HEATER AMPS

BREAKER

RMS-7

220/240

29

40 AMPS

RMS-11

220/240

46

60 AMPS

HAVE AREAS LARGER THAN 1800 SQUARE FEET? NO PROBLEM
Areas larger than 1800 square feet should be subdivided and served with two or more RMS units sized for each area.

EXAMPLE #1: A 2500 square foot basement could be treated as two 1250 square foot areas each served by one RMS11 having 4 loops each.

EXAMPLE #2: Two temperature zones are desired in the 2500 square foot basement, one 760 square foot zone could be served by one RMS7 with 2 300 foot loops and the remaining 1760 square foot area served by one RMS11 with 5 300 foot loops. (Thermal isolation is required)

THE BASICS OF RADIANT

300’ Loop Kit – PEX Radiant Floor Tubing Kit Item #: RMS-300 $173.00
PEX Oxygen barrier tubing installs with Radiant Heat system on 2” insulation foam board. This Radiant Made Simple Radiant Floor Tubing Kit works with Radiant Made simple Radiant Heat systems. Requires .92 gallons of RV antifreeze per 100 feet of tubing. 300′ X 1/2″ PEX Oxygen barrier tubing installs with Radiant Heat system on insulating foam board. Tube bends help make transition for tubing in concrete to the manifolds. Allow 1 linear foot of tubing for 1 square foot of space to be heated. Order 1 each 300’ Loop Kit per 300 square feet of space to be heated.
Crete-Heat Insulated Floor Panel System – 1“ Black Bag Item #: 59347 $132.14
PRICE REDUCED !! – You cannot afford to install radiant floor heating without this product!

Radiant Installation Simplified

  • Cuts radiant system install time by as much as 2/3
  • Designed to hold tube securely in place with wider fasteners
  • 2 sizes available for both new construction and retrofitting existing buildings
  • UV Protected Packaging for outdoor storage

Ready For Concrete
The Crete-HeatTMInsulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier and radiant tube holding grid that allows for simplied installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete is normally used. For basements, a ‘light weight’ concrete (sand instead of pea gravel) maybe used in 1-1/2″ thickness. Uses 1/2″ tubing. Total thickness is 1-7/8″This Product is SOLD BY THE BAG – 12 PIECES PER BAG
1″ Black Bag covers 96 Sq Ft. Determine your total square footage and divide by 96 for total BAGS needed.

Crete-Heat Insulated Floor Panel System – 2“ Green Bag Item #: 59367 $98.08
PRICE REDUCED !! – You simply cannot afford to install radiant floor heating without this product!

You certainly cannot afford the energy lost into the ground!

  • Cuts radiant system install time by as much as 2/3
  • Designed to hold tube securely in place with wider fasteners
  • 2 sizes available for both new construction and retrofitting existing buildings
  • UV Protected Packaging for outdoor storage

Ready For Concrete
The Crete-HeatTMInsulated Floor Panel System, is an easily assembled modular board insulation, vapor barrier and radiant tube holding grid that allows for simplied installation of hydronic radiant floor heating systems in basements, garages, main floor slab on grade and above grade installations where concrete or gypcrete is normally used.The Crete-HeatTM Insulated Floor Panel System is 2 7/8″ overall in thickness, with 2″ of solid EPS foam providing an R-10. The panel board size is 25″ x 49″ and the effective area is 24″ x 48″.
Our retrofit or over grade panel provides 2 1/8″ overall in thickness, with 1″ of solid EPS foam providing and R-6 with a 23 dB sound reduction knob on the lower surface. Each interlocking panel covers up to 8 square feet with fasteners for 1/2″ and 5/8″ radiant tubing. A 10-mil polystyrene film provides the vapor barrier.

This Product is SOLD BY THE BAG – 8 PIECES PER BAG
EACH 2″ Green Bag covers 64 Sq Ft. Determine your total square footage and divide by 64 for total BAGS needed.

RMS-11 – Radiant Made Simple Radiant Heat System – 11 kW, 37,540 BTU Electric Heater, 240 Volts A/C, 60 Amp. Item #: RMS-11 $2,031.00
Radiant Made Simple Radiant Heat Systems provides an energy efficient, Do-It-Yourself solution, for heating a single zone: basements, garage, home additions, green house or remodeling projects. This 230V, 60 Amp product provides everything you need to install radiant floor heating. Efficiency approaches 99%.
RMS-7 – Radiant Made Simple Radiant Heat System – 7 kW, 23,890 BTU Electric Heater, 240 Volts A/C, 40 Amp. Item #: RMS-7 $2,011.00
Radiant Made Simple Radiant Heat Systems provides an energy efficient, Do-It-Yourself solution, for heating a single zone: basements, garage, home additions, green house or remodeling projects. This 230V, 40 Amp product provides everything you need to install radiant floor heating. Efficiency approaches 99%.

Leave a Reply

Your email address will not be published. Required fields are marked *