Slide Valves, Poly Boots & Unloaders

If you have a Sioux bulk feed bin that is round at the bottom and measures 16" then this part will fit your bin. If you have an older Sioux bulk feed bin that is square at the bottom and that bulk feed bin measures 25" then we can make this part work with your bulk feed bin but we will need to add another part to your order. In this case, order the Collar Adapter 25.0 to 16.0 option below for your feed bin.

Comes complete with all hardware

If you have an older Sioux bulk feed bin then you will need this adapter to reduce the size of the hopper on your older bulk feed bin to fit the new Poly Boot & Unloader (item number S155189) for your bulk feed bin.

Gain easy access to hopper bins. This is the easiest, most effective way to draw small amounts of material from hopper bottom bins. Push the handle up, that slides open a gate mounted on the side of the hopper. Fill a tea cup, a bucket, to a feed cart. Pull the same handle down to stow the flow or close the gate. It's easy, quick, and a one handed job.

• Mounts on new or old feed bins
• Hole required in bin is 2-7/8" x 5-3/8"
• Comes with an adhesived backed template
• Mounts on bins with auger systems
• Can be padlocked
• Tabs on chute allow a bucket to be hung below the hopper valve

Approximate Weight - 45 lbs.

Collar requires 30 nuts and 30 screws.

The photo shows the ENTIRE Poly Boot & Unloader with Slide Gate for your bulk feed bin. For that assembly please see our item number S155189. This item number ONLY includes the black/blue boot for your bulk feed bin shown in the photo.

Collar requires 30 nuts and 30 screws.

Collar requires 1 packet of sealant.

Approximate Weight - 45 lbs.

This boot has the same dimensions as the 30 degree poly boot, but is cut straight on the bottom

Outside diameter top end is 17 3/8", inside is 16 1/2"
Outside diameter of lower end is 6 1/2" x 10 3/4" and the inside is 6"x10"
The length from top to bottom is 13 3/4".

For 16" poly boot
Part #2 is approximately 10" tall

For 16" poly boot.