TempShield™ Single Bubble White/Foil reflective insulation is one layer of 5/32" barrier bubble film laminated between one layer of foil and one layer of white polyethylene (Nylon Reinforced).
DESIGNED to be used for commercial or metal buildings where aesthetics is of primary importance.
The purpose for installing TempShield™ Single Bubble White/Foil in a concrete slab application is two-fold; first, it acts as a vapor retarder and second, it provides a thermal break. The thermal resistance of TempShield™ product under concrete is based on testing done on a calibrated hotplate using ASTM 518 test procedures. The thermal resistance is R-1.1.
TempShield™ Single Bubble White/Foil is ideal for hot water heater jackets, metal pipes and temperature-sensitive packaging applications.
 Key Benefits
- Clean, Lightweight, Easy To Install
- White Appearance
- Saves Energy and Money
TempShield™ will reradiate only 3% of heat in which it comes in close physical contact, compared with the approximate 90% reradiation of ordinary building materials, at the same temperature.
|
How Radiant Heat Transfers Through Roofs
 TempShield™ is used as insulation against radiant heat transfer and can be used to its greatest advantage in instances where radiation is the predominant means of heat transfer. It is the bright aluminum surface of all TempShield™ products that gives it its insulating properties. This happens in two ways:
TempShield™ is an excellent reflector of all long wave radiant heat that strikes it - reflecting up to 97% of all radiant heat.
TempShield™ will reradiate only 3% of heat in which it comes in close physical contact, compared with the approximate 90% reradiation of ordinary building materials, at the same temperature.
|
Specifications |
UNITED STATES TESTING COMPANY. INC.
* ASTM Test Method E-84-81A
** ASTM Test Method E-84-95
*** ASTM Test Method D-781
**** ASTM E-96 Method A
***** ASTM E-408
|
|
|
HOME
powered by
