This feeder ships on a pallet and is difficult to ship economically in quantities of less than (5). Because of this, we have a minimum order of (5).
SHOP ALL OF OUR MINERAL FEEDERS
Feeder Specifications
This is an economical design that uses a rugged metal support frame over a poly tub (rust-free!). The feeder weighs approximately 45 pounds and measures 15 inches tall, is 26 inches in diameter, and does NOT have dividers inside the open tub.
Filling the feeder is done by removing the flap from the pin. Its poly tub holds 15 gallons and equates to approximately 1-1/2 bushels. Three ground stakes are included so you may pin them down to prevent movement.
The 15-inch height of this economical mineral feeder is measured from the top of the cover stud, and the tub itself measures 26 inches in diameter. The poly tub of this ground mineral feeder is made of rubber and is impervious to rust, while the flap is made of 1/16th plastic that is laminated to the rubber itself. The tub may be removed from the feeder frame by lifting the frame off the top. Please see the picture below to view the mineral feeder without the flap attached.
Please note that the three spike anchors are not shown in the picture below but are included as shown in the picture above.
